inoCUT ic2

INOTEC GmbH inoCUT ic2INOTEC GmbH inoCUT ic2

Cutters

inoCUT ic2

The innovative hot wire cutter for cutting ETICS insulation boards*


Benefits at a glance

  • Space-saving cutting bracket for maximum freedom of movement in the scaffold
  • Automatic cutting wire switch-on / switch-off
  • Sturdy, impervious and watertight baseplate
  • Spring catch to simply, precisely and rapidly lock the cutting bracket for mitre cuts
  • Quick release for cutting wire
  • Locking device for repeat cuts
  • Scaffold clamp for securing easily to the railing scaffold

The inoCUT ic2 revolutionises the thermal cutting of ETICS rigid foam panels on the construction site.
The space-saving cutting bracket guarantees maximum freedom of movement and a sufficient route of approx. 20 cm on the scaffold (for a scaffold width of W06). Unlike conventional devices, the cutting bracket does not have to be pulled out to double the width for cutting operations.
The cutting wire moves within the compact bracket thanks to its unique mechanism.

_______________

* The machine is available in 110 and 230 V


Further information / downloads:


Alternative Machines:

Operating voltage: 110 or 230 V / 50 Hz
Cutting length: max. 107 cm
Cutting depth: max. 30 cm
Dimensions (W x H x D): 566 x 1.228 x 120 mm
Weight: ca. 8,0 kg
INOTEC GmbH inoCUT ic2

Scope of delivery
inoCUT ic2:
Item no. 10040926

  • Base frame
  • Cutting bracket
  • Connecting cable
  • Power supply unit
  • Left and right support strip
  • Spare cutting wire
  • Scaffold clamp
  • Operating instructions
 inoCUT ic2

inoCUT ic2

Corkboard 
Foam glass panels 
Hemp boards 
Mineral wool 
Phenolic resin panels 
Polystyrene rigid foam panels 
Polyurethane panels 
Potential cuts: Cut-outs 
Potential cuts: Diagonal cuts 
Potential cuts: Diagonal cuts with mitre joints 
Potential cuts: Groove cuts 
Potential cuts: Layered cut 
Potential cuts: Layered cuts with mitre joints 
Potential cuts: Layered groove cuts 
Potential cuts: Mitre cuts 
Potential cuts: Round cuts 
Potential cuts: Separating cuts 
Potential cuts: Straight cuts 
Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm (Article no. 10039890)

Plastic transport case

Plastic transport case

Plastic transport case for ic2 and ic3 cutter (Article no. 10040780)

Stopper unit

Stopper unit

  • Can be used as a cutting limit or dimensional stop

Stopper unit (Article no. 10040218)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form inoCUT ic2

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list