inoCUT ic3

INOTEC GmbH inoCUT ic3INOTEC GmbH inoCUT ic3

Cutters

inoCUT ic3

The innovative hot wire cutter for cutting ETICS insulation boards


Benefits at a glance

  • Space-saving cutting bracket for maximum freedom of movement in the scaffold
  • Automatic cutting wire switch-on / switch-off
  • Sturdy, insensitive and water-tight base plate
  • Transport protection thanks to the robust profile frame
  • Power cables for a higher wire temperature and improved cutting performance
  • Spring catch to simply, precisely and rapidly lock the cutting bracket for mitre cuts
  • Device for trimming the cutting wire
  • Quick release for cutting wire
  • Locking device for repeat cuts

 

The inoCUT ic3 revolutionises thermal cutting of ETICS rigid foam panels on the construction site.
The space-saving cutting bracket guarantees maximum freedom of movement and a sufficient route of approx. 20 cm on the scaffold (for a scaffold width of W06). Unlike conventional devices, the cutting bracket does not have to be pulled out to double the width for cutting operations.
The cutting wire moves within the compact bracket thanks to its unique mechanism.

_______________

* The machine is available in 110 and 230 V


Further information / downloads:


Alternative Machines:

Operating voltage: 110 or 230 V / 50 Hz
Cutting length: max. 107 cm
Cutting depth: max. 30 cm
Dimensions (W x H x D): 500 x 1.620 x 190 mm
Weight: ca. 14,5 kg
INOTEC GmbH inoCUT ic3

Basic module
Item no. 10040177

Scope of delivery
inoCUT ic3:

  • Base plate
  • Profile frame
  • Folding foot
  • Cutting bracket
  • Connecting cable
  • Power supply unit
  • Left and right support strip
  • Spare cutting wire
  • Operating instructions

inoCUT ic3 set
Item no. 10040931

Scope of delivery
inoCUT ic3 set:

As with the basic module (item no. 10040177)

Plus:

  • Plastic case
 inoCUT ic3

inoCUT ic3

Corkboard 
Foam glass panels 
Hemp boards 
Mineral wool 
Phenolic resin panels 
Polystyrene rigid foam panels 
Polyurethane panels 
Potential cuts: Cut-outs 
Potential cuts: Diagonal cuts 
Potential cuts: Diagonal cuts with mitre joints 
Potential cuts: Groove cuts 
Potential cuts: Layered cut 
Potential cuts: Layered cuts with mitre joints 
Potential cuts: Layered groove cuts 
Potential cuts: Mitre cuts 
Potential cuts: Round cuts 
Potential cuts: Separating cuts 
Potential cuts: Straight cuts 
Corner cutter for inoCUT ic3 and ic4

Corner cutter for inoCUT ic3 and ic4

  • For making exact cut-outs in rafters, lintels, windowsills, etc.
  • Cutting depth:30 cm
  • With locking device for repeat cuts

Corner cutter for inoCUT (Article no. 10040810)

Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm (Article no. 10039890)

Scaffold clamp

Scaffold clamp

  • For securing the cutter to the scaffold handrail

Scaffold clamp (Article no. 10040216)

Plastic transport case

Plastic transport case

Plastic transport case for ic2 and ic3 cutter (Article no. 10040780)

Support foot / free-standing support

Support foot / free-standing support

  • For freely positioning the cutter

Support foot / free-standing support (Article no. 10040217)

Stopper unit

Stopper unit

  • Can be used as a cutting limit or dimensional stop

Stopper unit (Article no. 10040218)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form inoCUT ic3

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list