inoBEAM F21

INOTEC GmbH inoBEAM F21INOTEC GmbH inoBEAM F21

Delivery pumps

inoBEAM F21

The most powerful 400 V delivery pump for paste-like materials


Benefits at a glance

  • For paste-like materials
  • For coarse-particle materials
  • Material hopper made from stainless steel
  • Very high delivery rate
  • Continuously variable speed control using potentiometer
  • Simple operation

 

The inoBEAM F21 is the most powerful 400 V delivery pump suitable for a wide range of indoor and outdoor applications. Especially suitable for restoration plasters, single-layer sgraffito and concrete repair materials.


Further information / downloads:


Alternative Machines:

Operating pressure: to 40 bar
Operating voltage: 400 V / 50 Hz / 32 A
Power: frequency-controlled 3,0 kW
Flow volume: approx. 2 - 50 l/min
Conveying distance: approx. 60 m
Pressure height: approx. 40 m
Grain size: max. 10 mm
Material container: 100 l
Dimensions (L x W x H): 1.120 x 700 x 935 mm
Weight:  approx. 140 kg
INOTEC GmbH inoBEAM F21

Basic module
Item no. 10040784

Scope of delivery
inoBEAM F21:

  • Frame
  • 4 running wheels
  • Material hopper made from stainless steel
  • Gear motor
  • Rotor/stator D 7-2.5
  • Switching cabinet
  • Delivery shaft
  • Mortar pressure gauge
  • 35 V / 25 V coupling reducer
  • Sponge ball Ø 30 mm
  • 25 V / GEKA plaster piece
  • Tool set
  • Operating instructions

inoBEAM F21 Set
Item no. 10040768

Scope of delivery
inoBEAM F21 Set:

As with the basic module
(item no. 10040784)


Plus:

  • 10 m mortar hose with a diameter of 25 mm
  • Spray pipe with whip hose with nozzles (4, 5, 6, 8, 10, 13 mm)
  • 15 m air hose with a diameter of ½”
  • Remote control cable, 16 m
  • Assembly spray lubricant
  • Adapter (GEKA / EWO)
 inoBEAM F21

inoBEAM F21

Acoustic renovation paint 
Airless spray-on smoothing compounds - with conversion kit “High-pressure pump” 
Bitumen 
Cement pastes, suspensions 
Cement plasters 
Concrete bonder 
Decorative fine coats 
ETICS glue, mineral 
ETICS glue, paste-like 
External dispersion paint - with conversion kit “High-pressure pump” 
Fibour plaster 
Fine acoustic finishing coats 
Fire protection mortar 
Floor spattling compounds 
Lime cement plasters 
Lime plasters 
Lime smoothers 
Liquid woodchip 
Mineral textured plasters 
Multi-layer acoustic spray plasters 
Paste-like textured plasters 
Porous concrete coats 
Rendering base 
Renovating plaster systems 
SPCC mortar / filler 
Spray-on spattling compounds 
Multi-purpose hose

Multi-purpose hose

  • For universal use, e.g. air, water
  • GEKA couplings crimped with sleeves on both sides
Technical data:  
Max. operating pressure: max. 15 bar
Temperature range:  -20 up to +90°C

Water / air hose - Ø 1/2“ - Length 10 m (Article no. 10022000)

Water / air hose - Ø 1/2“ - Length 15 m (Article no. 10022001)

Water / air hose - Ø 1/2“ - Length 20 m (Article no. 10022002)

Water / air hose - Ø 3/4“ - Length 20 m (Article no. 10022009)

INOTEC mortar hose

INOTEC mortar hose

  • Abrasion-resistant special hose for pumping highly pressurised wet mortar; largely kink-proof
  • For an operating pressure of 40 bar with 3 times the reliability
  • Yellow on the outside: less heat builds up in the event of sun exposure
  • With mortar hose couplings, M-piece and rotating V-piece (only with diameters of 25 mm)
  • With cam levers on the M-piece
Technical data:  
Operating pressure:  40 bar
Bursting pressure: 120 bar

Inotec mortar hose - Ø 25 mm - Length 10 m (Article no. 10008346-001)

Inotec mortar hose - Ø 25 mm - Length 15 m (Article no. 10008346-002)

Inotec mortar hose - Ø 25 mm - Length 20 m (Article no. 10008346-003)

Inotec mortar hose - Ø 35 mm - Length 10 m (Article no. 10022032)

Inotec mortar hose - Ø 35 mm - Length 20 m (Article no. 10008346-007)

Flushing hose

Flushing hose

  • For clearing blockages in mortar hoses

Flushing hose - Length 10 m (Article no. 10024385)

400 V / 5 x 4 mm² extension cable

400 V / 5 x 4 mm² extension cable

  • 32 A plug and coupling

400 V / 5 x 4 mm² extension cable - Length 20 m (Article no. 10015201)

Remote control cable with remote control switch

Remote control cable with remote control switch

Remote control cable with remote control switch - Length 16 m (Article no. 10042464)

Remote control cable with remote control switch - Length 32 m (Article no. 10042465)

Remote control extension cable without remote control switch

Remote control extension cable without remote control switch

  • For remote control cable
  • For remote control switch
  • For inoCOLL / inoCOLL Pro one-handed gun

Remote control extension cable without remote control switch - Length 16 m (Article no. 10015210)

Remote control extension cable without remote control switch - Length 32 m (Article no. 10042463)

Remote control switch

Remote control switch

  • With 0.2 m cable, indicator light and 4-pin Harting plug

Remote control switch (Article no. 10015134)

Hose holder

Hose holder

  • For rapidly fixing hoses to the scaffold

Hose holder (Article no. 10018503)

inoCOLL one-handed gun

inoCOLL one-handed gun

  • For bonding and basecoat mortars
  • 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose
  • For grit sizes up to 1.5 mm

inoCOLL one-handed gun (Article no. 10024144)

inoCOLL PRO one-handed gun

inoCOLL PRO one-handed gun

  • For applying reinforcing mortar and finishing plaster up to 4 mm grit size
  • Operating pressure: up to 40 bar

inoCOLL PRO one-handed gun (Article no. 10041950)

Spray attachment for inoCOLL / PRO one-handed gun  with GEKA air connection

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection

  • For spraying mineral and paste-like products
  • With 10 mm nozzle

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection (Article no. 10039322)

Glue distribution head for inoCOLL / PRO one-handed gun

Glue distribution head for inoCOLL / PRO one-handed gun

The glue distribution head is suitable for applying paste-like glues/dispersion glues to boards, e.g. acoustic boards, insulating boards in the prefabricated construction industry.
The material is applied using hoses that are connected to a glue distribution head and applied at even intervals.
The distribution head is connected to a lockable GEKA coupling on the one-handed gun.
Maximum operating pressure: 10 bar !

Glue distribution head for inoCOLL / PRO (Article no. 10040623)

Small spray pipe – short design

Small spray pipe – short design

  • With 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose (without a nozzle)
  • For grit sizes up to 3.0 mm

Small spray pipe – short design (Article no. 10039887)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

- Spray attachment for inoCOLL / PRO one-handed gun (10039322)
- Small spray pipe (10039887)
- Angled spray head with GEKA coupling (10039457)
- Spray pipe set (10039886)

  • Made from stainless steel

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 4 mm (Article no. 10039271)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 5 mm (Article no. 10042461)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 6 mm (Article no. 10039220)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 8 mm (Article no. 10039221)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 10 mm (Article no. 10039222)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 13 mm (for grit size up to 6 mm) (Article no. 10040941)

MAI finishing coat device, straight

MAI finishing coat device, straight

  • With 25 mm M-piece coupling
  • Including a 14 mm jet nozzle

MAI finishing coat device, straight (Article no. 10024362)

Jet nozzle

Jet nozzle

  • For MAI finishing coat device

Jet nozzle - Ø 10 mm (Article no. 10024378)

Jet nozzle - Ø 12 mm (Article no. 10024379)

Jet nozzle - Ø 14 mm (Article no. 10024380)

Jet nozzle - Ø 16 mm (Article no. 10024381)

Straight finishing coat device

Straight finishing coat device

  • With 25 mm M-piece coupling
  • Incl. a 14 mm finishing coat nozzle

Straight finishing coat device (Article no. 10024098)

Finishing coat device with sturdy ball valve

Finishing coat device with sturdy ball valve

  • With 25 mm M-piece coupling
  • Including a 14 mm finishing coat nozzle
  • Only permissible in conjunction with the remote control switch

Finishing coat device with sturdy ball valve (Article no. 10024099)

Finishing coat nozzles

Finishing coat nozzles

  • For finishing coat devices, item nos.:
    10024098 / 10024099

Finishing coat nozzles - Ø 10 mm (Article no. 10024089)

Finishing coat nozzles - Ø 12 mm (Article no. 10024090)

Finishing coat nozzles - Ø 14 mm (Article no. 10024091)

Finishing coat nozzles - Ø 16 mm (Article no. 10024093)

Straight decorative plaster spraying device

Straight decorative plaster spraying device

  • Not including nozzle with 25 mm M-piece coupling
  • For grit sizes up to 6.0 mm

Straight decorative plaster spraying device (Article no. 10024246)

Nozzle for straight decorative plaster spraying device

Nozzle for straight decorative plaster spraying device

  • Made from stainless steel

Nozzle for straight decorative plaster spraying device - Ø 8 mm (Article no. 10024071)

Nozzle for straight decorative plaster spraying device - Ø 10 mm (Article no. 10024065)

Nozzle for straight decorative plaster spraying device - Ø 12 mm (Article no. 10024066)

Air quantity controller with EWO couplings

Air quantity controller with EWO couplings

  • For precisely adjusting the air quantity when spraying.
  • Is connected between the air hose and spraying device.

Air quantity controller with EWO couplings (Article no. 10017793)

35 V -> 25 V coupling reducer

35 V -> 25 V coupling reducer

  • For connecting two mortar hoses or reducing the machine outlet.

Coupling reducer 35 V -> 25 V (Article no. 10022101)

Plaster piece with GEKA coupling

Plaster piece with GEKA coupling

  • For cleaning mortar hoses

Plaster piece with GEKA coupling - 25 M-piece (Article no. 10022112)

Plaster piece with GEKA coupling - 25 V-piece (Article no. 10022113)

Plaster piece with GEKA coupling - 35 M-piece (Article no. 10022114)

Sponge balls (soft version)

Sponge balls (soft version)

  • For cleaning material / mortar hoses

Sponge balls (soft version) - Ø 14 mm for hose Ø 13 mm (Article no. 10008116-001)

Sponge balls (soft version) - Ø 20 mm for hose Ø 19 mm (Article no. 10008116-003)

Sponge balls (soft version) - Ø 30 mm for hoseØ 25 mm (Article no. 10008116-004)

Sponge balls (soft version) - Ø 45 mm for hose Ø 35 mm (Article no. 10008116-005)

Sponge balls (solid version)

Sponge balls (solid version)

  • For cleaningmaterial / mortar hoses

Sponge balls (solid version) Ø 30 mm for hose Ø 25 mm (Article no. 10008116-007)

Sponge balls (solid version) Ø 45 mm for hose Ø 35 mm (Article no. 10008116-008)

KAESER 230 V Compressor Premium Car 450/30W

KAESER 230 V Compressor Premium Car 450/30W

The compact 230 volt compressor is ideal for many applications, such as spraying decorative coatings, plaster or bitumen, for operating compressed air tools, and for painting, etc.

Technical data:

Operating pressure:   10 bar
Suction capacity:   450 l/min
Output:   2,2 kW
Dimensions (L x W x H):   870 x 560 x 590 mm
Weight:       86 kg

KAESER 230 V Compressor Premium Car 450/30W (Article no. 10039227)

Water metering conversion kit

Water metering conversion kit

Technical data:

Water pressure: from 0 to 6 bar
Flow meter:  
from 5 to 60 l/hour
Solenoid valve:
24 V DC
Supply line: ¾“ water hose

Water metering conversion kit (Article no. 10040896)

230 V INOTEC Compact 330 compressor

230 V INOTEC Compact 330 compressor

The compact 230 V compressor is excellently suited to a multitude of
applications, such as spraying decorative coats, plasters or bitumen,
as well as operating compressed air tools, varnishing, etc.

 

Technical data:  
Operating pressure: 10 bar
Suction capacity: 330 l/min
Output: 2,05 kW
Dimensions (L x W x H):  396 x 473 x 598 mm
Weight:   32 kg

More powerful compressors available upon request!

230 V INOTEC Compact 330 compressor (Article no. 10034389)

D4 ½ output conveying screw

D4 ½ output conveying screw

  • Tip marked in green

D4 ½ output conveying screw (Article no. 10022543)

D4 ½ output screw casing (maintenance free)

D4 ½ output screw casing (maintenance free)



D4 ½ output screw casing (maintenance free) (Article no. 10022502)

D4-½ output screw casing with clamping strip

D4-½ output screw casing with clamping strip

D4-½ output screw casing with clamping strip (Article no. 10022501)

D7-2.5 conveying screw

D7-2.5 conveying screw

  • Tip marked in white

D7-2.5 S conveying screw (Article no. 10022558)

D7-2.5 white screw (maintenance free)

D7-2.5 white screw (maintenance free)

D7-2.5 white screw (maintenance free) (Article no. 10022516)

D8-1.5 conveying screw

D8-1.5 conveying screw

  • Tip marked in yellow

D8-1.5 conveying screw (Article no. 10022562)

D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free) (Article no. 10022517)

D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip (Article no. 10022519)

D8-2 output screw casing (maintenance free)

D8-2 output screw casing (maintenance free)

D8-2 output screw casing (maintenance free) (Article no. 10022565)

D8-2 screw casing (maintenance free)

D8-2 screw casing (maintenance free)

D8-2 screw casing (maintenance free) (Article no. 10022496)

Assembly spray lubricant

Assembly spray lubricant

  • For assembling the conveying screw and screw casing
  • 400 ml

Assembly spray lubricant (Article no. 10004591)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form inoBEAM F21

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list