inoCOMB Maxi Power

 inoCOMB Maxi Power inoCOMB Maxi Power

Mixing pumps

inoCOMB Maxi Power

The powerful 400 V mixing pump for mineral materials


Benefits at a glance    

  • Power output: with the 5.5 kW drive motor and 400 V output, it is possible to achieve a delivery range of 50 m and a delivery             height of 30 m.
  • Water pressure booster pump integrated
  • Robust frame
  • Simple operation
  • Mounting device for stator
  • Both the toolbox and the compressor are integrated into the frame.

OWCThe inoCOMB Maxi Power is a powerful 400 V mixing pump and the classic among mixing pumps!
It can be used for a wide variety of indoor and outdoor
applications, as well as for restoration and renovation work.
A mature development, careful processing and long-time proven components result in a high quality, which meets the requirements on the construction site.

Together with the dry delivery unit inoFLEX, the mixing pump Maxi Power process the material out of the one-way container.


Further information / downloads:


Alternative Machines:

 

Operating pressure: to 30 bar
Operating voltage: 400 V / 50 Hz / 32 A
Power: 5,5 kW
Flow volume: approx. 8 - 50 l/min
Conveying distance: approx. 50 m
Pressure height: approx. 30 m
Grain size: max. 6 mm
Material container: 145 l
Filling: approx. 880 mm
Dimensions (L x W x H): 1.100 x 730 x 1.500 mm
Weight: 270 kg
 inoCOMB Maxi Power

Basic module
Item no. 10042324

Scope of delivery
inoCOMB Maxi Power:

  • Frame
  • 4 running wheels
  • Material hopper
  • Gear motor
  • Rotor/stator D 6-3 Helix
  • Switching cabinet
  • Mortar pressure gauge
  • Handy K2 compressor
  • Mixing coil
  • Water fitting
  • Water pump
  • Plaster piece 35 M / GEKA
  • Sponge ball with a diameter of 30 mm, 45 mm
  • Tool set
  • Operating instructions

Ready-to-spray set
Item no. 10042323

Scope of delivery
inoCOMB Maxi Power Set:

As with the basic module
(item no. 10042324)

Plus:

  • 10 m mortar hose with a diameter of 25 mm
  • 15 m air hose with a diameter of ½”
  • Straight finishing coat device incl. nozzle with a diameter of 14 mm
  • Assembly spray lubricant
 inoCOMB Maxi Power

inoCOMB Maxi Power

Cement pastes, suspensions 
Cement plasters 
Concrete bonder 
Decorative fine coats 
ETICS glue, mineral 
ETICS glue, paste-like 
Fine acoustic finishing coats 
Fire protection mortar 
Floating screeds 
Floor spattling compounds 
Lime cement plasters 
Lime plasters 
Lime smoothers 
Liquid woodchip 
Machine-applied gypsum plasters for indoor applications 
Mineral textured plasters 
Multi-layer acoustic spray plasters 
Paste-like textured plasters 
Porous concrete coats 
Renovating plaster systems 
SPCC mortar / filler 
Spray-on spattling compounds 
Multi-purpose hose

Multi-purpose hose

  • For universal use, e.g. air, water
  • GEKA couplings crimped with sleeves on both sides
Technical data:  
Max. operating pressure: max. 15 bar
Temperature range:  -20 up to +90°C

Water / air hose - Ø 1/2“ - Length 10 m (Article no. 10022000)

Water / air hose - Ø 1/2“ - Length 15 m (Article no. 10022001)

Water / air hose - Ø 1/2“ - Length 20 m (Article no. 10022002)

Water / air hose - Ø 3/4“ - Length 20 m (Article no. 10022009)

INOTEC mortar hose

INOTEC mortar hose

  • Abrasion-resistant special hose for pumping highly pressurised wet mortar; largely kink-proof
  • For an operating pressure of 40 bar with 3 times the reliability
  • Yellow on the outside: less heat builds up in the event of sun exposure
  • With mortar hose couplings, M-piece and rotating V-piece (only with diameters of 25 mm)
  • With cam levers on the M-piece
Technical data:  
Operating pressure:  40 bar
Bursting pressure: 120 bar

Inotec mortar hose - Ø 25 mm - Length 10 m (Article no. 10008346-001)

Inotec mortar hose - Ø 25 mm - Length 15 m (Article no. 10008346-002)

Inotec mortar hose - Ø 25 mm - Length 20 m (Article no. 10008346-003)

Inotec mortar hose - Ø 35 mm - Length 10 m (Article no. 10022032)

Inotec mortar hose - Ø 35 mm - Length 20 m (Article no. 10008346-007)

Flushing hose

Flushing hose

  • For clearing blockages in mortar hoses

Flushing hose - Length 10 m (Article no. 10024385)

400 V / 5 x 4 mm² extension cable

400 V / 5 x 4 mm² extension cable

  • 32 A plug and coupling

400 V / 5 x 4 mm² extension cable - Length 20 m (Article no. 10015201)

Remote control cable with remote control switch

Remote control cable with remote control switch

Remote control cable with remote control switch - Length 16 m (Article no. 10042464)

Remote control cable with remote control switch - Length 32 m (Article no. 10042465)

Remote control extension cable without remote control switch

Remote control extension cable without remote control switch

  • For remote control cable
  • For remote control switch
  • For inoCOLL / inoCOLL Pro one-handed gun

Remote control extension cable without remote control switch - Length 16 m (Article no. 10015210)

Remote control extension cable without remote control switch - Length 32 m (Article no. 10042463)

Remote control switch

Remote control switch

  • With 0.2 m cable, indicator light and 4-pin Harting plug

Remote control switch (Article no. 10015134)

Starting mortar hose with M+V-part

Starting mortar hose with M+V-part

Starting mortar hose with M+V-part (Article no. 10022031)

Hose holder

Hose holder

  • For rapidly fixing hoses to the scaffold

Hose holder (Article no. 10018503)

inoCOLL one-handed gun

inoCOLL one-handed gun

  • For bonding and basecoat mortars
  • 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose
  • For grit sizes up to 1.5 mm

inoCOLL one-handed gun (Article no. 10024144)

inoCOLL PRO one-handed gun

inoCOLL PRO one-handed gun

  • For applying reinforcing mortar and finishing plaster up to 4 mm grit size
  • Operating pressure: up to 40 bar

inoCOLL PRO one-handed gun (Article no. 10041950)

Spray attachment for inoCOLL / PRO one-handed gun  with GEKA air connection

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection

  • For spraying mineral and paste-like products
  • With 10 mm nozzle

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection (Article no. 10039322)

Glue distribution head for inoCOLL / PRO one-handed gun

Glue distribution head for inoCOLL / PRO one-handed gun

The glue distribution head is suitable for applying paste-like glues/dispersion glues to boards, e.g. acoustic boards, insulating boards in the prefabricated construction industry.
The material is applied using hoses that are connected to a glue distribution head and applied at even intervals.
The distribution head is connected to a lockable GEKA coupling on the one-handed gun.
Maximum operating pressure: 10 bar !

Glue distribution head for inoCOLL / PRO (Article no. 10040623)

Small spray pipe – short design

Small spray pipe – short design

  • With 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose (without a nozzle)
  • For grit sizes up to 3.0 mm

Small spray pipe – short design (Article no. 10039887)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

- Spray attachment for inoCOLL / PRO one-handed gun (10039322)
- Small spray pipe (10039887)
- Angled spray head with GEKA coupling (10039457)
- Spray pipe set (10039886)

  • Made from stainless steel

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 4 mm (Article no. 10039271)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 5 mm (Article no. 10042461)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 6 mm (Article no. 10039220)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 8 mm (Article no. 10039221)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 10 mm (Article no. 10039222)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 13 mm (for grit size up to 6 mm) (Article no. 10040941)

MAI finishing coat device, straight

MAI finishing coat device, straight

  • With 25 mm M-piece coupling
  • Including a 14 mm jet nozzle

MAI finishing coat device, straight (Article no. 10024362)

Jet nozzle

Jet nozzle

  • For MAI finishing coat device

Jet nozzle - Ø 10 mm (Article no. 10024378)

Jet nozzle - Ø 12 mm (Article no. 10024379)

Jet nozzle - Ø 14 mm (Article no. 10024380)

Jet nozzle - Ø 16 mm (Article no. 10024381)

Straight finishing coat device

Straight finishing coat device

  • With 25 mm M-piece coupling
  • Incl. a 14 mm finishing coat nozzle

Straight finishing coat device (Article no. 10024098)

Finishing coat device with sturdy ball valve

Finishing coat device with sturdy ball valve

  • With 25 mm M-piece coupling
  • Including a 14 mm finishing coat nozzle
  • Only permissible in conjunction with the remote control switch

Finishing coat device with sturdy ball valve (Article no. 10024099)

Finishing coat nozzles

Finishing coat nozzles

  • For finishing coat devices, item nos.:
    10024098 / 10024099

Finishing coat nozzles - Ø 10 mm (Article no. 10024089)

Finishing coat nozzles - Ø 12 mm (Article no. 10024090)

Finishing coat nozzles - Ø 14 mm (Article no. 10024091)

Finishing coat nozzles - Ø 16 mm (Article no. 10024093)

Straight decorative plaster spraying device

Straight decorative plaster spraying device

  • Not including nozzle with 25 mm M-piece coupling
  • For grit sizes up to 6.0 mm

Straight decorative plaster spraying device (Article no. 10024246)

Nozzle for straight decorative plaster spraying device

Nozzle for straight decorative plaster spraying device

  • Made from stainless steel

Nozzle for straight decorative plaster spraying device - Ø 8 mm (Article no. 10024071)

Nozzle for straight decorative plaster spraying device - Ø 10 mm (Article no. 10024065)

Nozzle for straight decorative plaster spraying device - Ø 12 mm (Article no. 10024066)

Finishing coat device, long design

Finishing coat device, long design

  • With offset tip
  • Including a 12 mm nozzle

Finishing coat device, long design (Article no. 10040697)

Static mixer

Static mixer

  • Prevents / destroys node in mortar
  • Diameter: 35 mm
  • Length:200 mm
  • incl. Coupling M-piece 35 mm and V-piece 35 mm

Static mixer (Article no. 10042362 )

35 V -> 25 V coupling reducer

35 V -> 25 V coupling reducer

  • For connecting two mortar hoses or reducing the machine outlet.

Coupling reducer 35 V -> 25 V (Article no. 10022101)

Plaster piece with GEKA coupling

Plaster piece with GEKA coupling

  • For cleaning mortar hoses

Plaster piece with GEKA coupling - 25 M-piece (Article no. 10022112)

Plaster piece with GEKA coupling - 25 V-piece (Article no. 10022113)

Plaster piece with GEKA coupling - 35 M-piece (Article no. 10022114)

Sponge balls (soft version)

Sponge balls (soft version)

  • For cleaning material / mortar hoses

Sponge balls (soft version) - Ø 14 mm for hose Ø 13 mm (Article no. 10008116-001)

Sponge balls (soft version) - Ø 20 mm for hose Ø 19 mm (Article no. 10008116-003)

Sponge balls (soft version) - Ø 30 mm for hoseØ 25 mm (Article no. 10008116-004)

Sponge balls (soft version) - Ø 45 mm for hose Ø 35 mm (Article no. 10008116-005)

Sponge balls (solid version)

Sponge balls (solid version)

  • For cleaningmaterial / mortar hoses

Sponge balls (solid version) Ø 30 mm for hose Ø 25 mm (Article no. 10008116-007)

Sponge balls (solid version) Ø 45 mm for hose Ø 35 mm (Article no. 10008116-008)

INOTEC compressor (black) compact C 330 PP, 230 V

INOTEC compressor (black) compact C 330 PP, 230 V

The compact 230 V compressor is excellently suited to a multitude of applications, such as spraying decorative coats, plasters, etc.


Also as an auxiliary compresso for

  • inoCOMB Picco Business
  • inoCOMB Maxi Power
  • inoCOMB M4G Basic
  • inoCOMB Fox

Technical data:

Operating pressure: 10 bar
Suction capacity: 330 l/min
Output: 2,05 kW
Dimensions (L x W x H): 396 x 473 x 598 mm
Weight: ca. 32 kg
More powerful compressors available upon request!

 

INOTEC compressor (black) compact C 330 PP, 230 V (Article no. 10041150)

Handy K2 compressor, 400 V

Handy K2 compressor, 400 V

Mobile, universal use diaphragm compressor for the production of oil-free compressed air. Used in many mixing pumps due to its low maintenance and compact design, e.g. inoCOMB M4G.


Technical data:

Operating pressure: 5.5 bar
Suction capacity: 250 l/min
Output: 0.9 kW
Operating voltage: 400 V
Dimensions (L x W x H): 495 x 165 x 340 mm
Weight: 23.5 kg

Handy K2 compressor, 400 V (Article no. 10023102)

KAESER 230 V Compressor Premium Car 450/30W

KAESER 230 V Compressor Premium Car 450/30W

The compact 230 volt compressor is ideal for many applications, such as spraying decorative coatings, plaster or bitumen, for operating compressed air tools, and for painting, etc.

Technical data:

Operating pressure:   10 bar
Suction capacity:   450 l/min
Output:   2,2 kW
Dimensions (L x W x H):   870 x 560 x 590 mm
Weight:       86 kg

KAESER 230 V Compressor Premium Car 450/30W (Article no. 10039227)

inoCOMB M4G / Maxi Power / G4 injection hood

inoCOMB M4G / Maxi Power / G4 injection hood

consisting of:

  • Injection hood
  • Rotor sensor
  • 50 m control cable for rotor sensor

inoCOMB M4G / Maxi Power / G4 injection hood (Article no. 10039381)

Mobile delivery system for inoTRANS FF 100 free-fall silos

Mobile delivery system for inoTRANS FF 100 free-fall silos

Technical data:  
Operating voltage: 400 V / 50 Hz
Nominal output: 5,5 kW
Protection 25 A
Dimensions (L x W x H): 1.200 x 630 x 630 mm
Suction capacity: approx. 100 m3/h
Conveying vessel volume: 70 l
Dimensions: 950 x 800 x 509 mm
Weight of compressor (dry rotor), frame and switching cabinet: 205 kg
Weight of the conveying vessel: 103 kg

Scope of delivery:
Conveying system, conveying vessel, rotary compressor, connecting hose: 8 m

Mobile delivery system for inoTRANS FF 100 free-fall silos (Article no. 10042348)

Mobile delivery system for inoTRANS P 100 pressure silos

Mobile delivery system for inoTRANS P 100 pressure silos

Technical data:  
Operating voltage: 400 V / 50 Hz
Nominal output: 5,5 kW
Protection: 25 A
Dimensions (L x W x H): 1.200 x 630 x 630 mm
Suction capacity: approx. 100 m3/h
Gewicht von Kompressor (Trockenläufer), Gestell und Schaltschrank: 203 kg
Conveyor block weight: 29 kg
Conveyor block dimensions (L x W x H): 550 x 360 x 480 mm

Scope of delivery:
Delivery system, conveyor block, rotary compressor, 7 m control hose, 6 m silo connection hose, 5 m conveyor block connection hose

Mobile delivery system for inoTRANS P 100 pressure silos (Article no. 10042347)

On request: 400 V external vibrating unit with 5 m cable and 4 x 16 A plug

On request: 400 V external vibrating unit with 5 m cable and 4 x 16 A plug

  • For free-fall conveyor system, for attachment to silos

On request: 400 V external vibrating unit with 5 m cable and 4 x 16 A plug (Article no. 10039440)

On request: INOTEC gypsum delivery hose

On request: INOTEC gypsum delivery hose

  • Complete with C couplings

For delivering dry mortar from the silo to the plastering machine via the delivery system. Abrasion-resistant, flexible at low temperatures, for a BP of 10 bar. Featuring C couplings with special grommets integrated on both sides that guarantee a transition-free flow of material.

Technical data:

 

Hose dimensions:

42 x 7 mm

Operating pressure: 

up to 10 bar

On request: INOTEC gypsum delivery hose - Length 10 m (Article no. 10008342-002)

On request: INOTEC gypsum delivery hose - Length 20 m (Article no. 10008342-001)

Turbomix after mixer (on request)

Turbomix after mixer (on request)

  • Galvanised
  • Volume approx. 2.5 l
  • E.g. for lightweight plaster

Turbomix after mixer (on request) (Article no. 10023220)

Mixing coil

Mixing coil

Insulating plaster mixing coil, for inoCOMB Maxi Power / M4G / G4 (Article no. 10023186)

Standard mixing coil, for inoCOMB Maxi Power / M4G / G4 (Article no. 10039464)

D4 ¼ output conveying screw

D4 ¼ output conveying screw

  • Tip marked in black

D4 ¼ output conveying screw (Article no. 10022534)

D4-¼ output screw casing (maintenance free)

D4-¼ output screw casing (maintenance free)

D4-¼ output screw casing (maintenance free) (Article no. 10022524)

D4 ½ output conveying screw

D4 ½ output conveying screw

  • Tip marked in green

D4 ½ output conveying screw (Article no. 10022543)

D4-½ conveying screw with tappets for after-mixers

D4-½ conveying screw with tappets for after-mixers

(applies only to D4-½ screw coating with clamping strip art. no. 10022501)

  • Head tipped in green

D4-½ conveying screw with tappets for after-mixers (Article no. 10022546)

D4 ½ output screw casing (maintenance free)

D4 ½ output screw casing (maintenance free)



D4 ½ output screw casing (maintenance free) (Article no. 10022502)

D4-½ output screw casing with clamping strip

D4-½ output screw casing with clamping strip

D4-½ output screw casing with clamping strip (Article no. 10022501)

D6-3 C45 conveying screw

D6-3 C45 conveying screw

D6-3 C45 conveying screw (Article no. 10022555)

D6-3 screw casting (maintenance free)

D6-3 screw casting (maintenance free)

D6-3 screw casting (maintenance free) (Article no. 10022511)

D6-3 Helix conveying screw

D6-3 Helix conveying screw

  • Tip marked in orange

D6-3 Helix conveying screw (Article no. 10036994)

D6-3 Helix orange screw casing

D6-3 Helix orange screw casing

D6-3 Helix orange screw casing (Article no. 10036995)

D8-1.5 conveying screw

D8-1.5 conveying screw

  • Tip marked in yellow

D8-1.5 conveying screw (Article no. 10022562)

D8-1.5 conveying screw with tappet for after-mixers

D8-1.5 conveying screw with tappet for after-mixers

  • Tip marked in yellow

D8-1.5 conveying screw with tappet for after-mixers (Article no. 10022563)

D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free) (Article no. 10022517)

D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip (Article no. 10022519)

D8-2 output screw casing (maintenance free)

D8-2 output screw casing (maintenance free)

D8-2 output screw casing (maintenance free) (Article no. 10022565)

D8-2 screw casing (maintenance free)

D8-2 screw casing (maintenance free)

D8-2 screw casing (maintenance free) (Article no. 10022496)

Assembly spray lubricant

Assembly spray lubricant

  • For assembling the conveying screw and screw casing
  • 400 ml

Assembly spray lubricant (Article no. 10004591)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form inoCOMB Maxi Power

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list