inoCOMB Picco Power

INOTEC GmbH inoCOMB Picco PowerINOTEC GmbH inoCOMB Picco Power

Mixing pumps

inoCOMB Picco Power

The light and compact 230 V* mixing pump for mineral and paste-like materials


Benefits at a glance

  • Power output: 3.0 kW and 230 V, making a conveyor width of 30 m and a lifting height of 20 m achievable
  • Continuously variable delivery rate
  • Material hopper made from stainless steel
  • Simple cleaning thanks to PU mixing zone
  • Powerful compressor – can also be used for processing decorative finish coatings
  • The total weight without compressor is only 65 kg! This therefore allows for easy transport.


OWCThe inoCOMB Picco Power is a trendsetter among compact 230 V mixing pumps. With its power output, a conveyor width of 30 m and a lifting height of 20 m are easily achievable. As a result, the Picco Power – even without high-voltage current – is very versatile on any construction site.
Parts that come into contact with materials, such as the hopper, mixing shaft, pump flange and protective screen, are made of high-quality stainless steel.
The simple operation and easy-to-clean PU mixing zone ensure smooth operation right from the start.

Together with the dry delivery unit inoFLEX, the mixing pump Picco Power process the material out of the one-way container.

_______________

* The machine is also available in 110 V


Further information / downloads:


Alternative Machines:

Picco Power: 230 V mixing pump

Picco Power: 230 V mixing pump

  • No high-voltage current required, yet still very powerful.
    → Can be used on any construction site with lighting current connection

 

Picco Power: 3.0 kW drive motor

Picco Power: 3.0 kW drive motor

  • Powerful, frequency-controlled
    → High variable adjustment of delivery rate

 

Picco Power: Drive motor with foldable sides

Picco Power: Drive motor with foldable sides

  • Sides can be folded away
    → Good accessibility to mixing coil
  •  Electrically locked
    → Security for the operator
Picco Power: Material hopper made of stainless steel with protective grating

Picco Power: Material hopper made of stainless steel with protective grating

  • Stable material for the harsh conditions found on construction sites
    →     Long container service life
    →     The processing of mineral and pasty materials is possible
  • No material deposits
    →     Quick and easy to clean
  • No paint chipping or rust particles
    →     No deposits of organic materials
  • Contract protection thanks to protective grating
    →     Security for the operator
 Picco Power: Polyurethane mixing zone

Picco Power: Polyurethane mixing zone

  • No material deposits
    → Durable material
    → Low wear and tear
    → Easy to clean
    → Low amount of time required for cleaning
    → Good mixing result
    → Cost savings
Picco Power: Ergonomic switching cabinet

Picco Power: Ergonomic switching cabinet

  • Clearly structured, well laid out and easily accessible controls
    → Very simple operation
Picco Power: Can be connected to OWC containers

Picco Power: Can be connected to OWC containers

  • Automatic filling from an OWC (one way container) using the flexible inoFLEX delivery unit
    → No carrying of bagged goods
    → No more manual filling
    → Time savings
    → No dust formation
    → Constant, steady material consistency
Picco Power: Compressor integrated in the frame (optional accessory)

Picco Power: Compressor integrated in the frame (optional accessory)

  • Compressor is removable
    → Thus also suitable for other machines and applications
    → Good protection for compressor and water fitting

 

Picco Power optional accessories: Powerful compressor with pressure switch INOTEC compressor compact C 330 PP

Picco Power optional accessories: Powerful compressor with pressure switch INOTEC compressor compact C 330 PP

  • High air capacity
    → Wide range of applications
    → Ready-to-spray, decorative coatings are therefore possible


 

Picco Power: Robust tubular frame with puncture-free, construction site-compliant running wheels

Picco Power: Robust tubular frame with puncture-free, construction site-compliant running wheels

  • Solid construction / 4 wheels
    → No punctures
    → Durable construction
    → Simple and safe movement on site
    → Good stability
Picco Power: Easily accessible and visible water fitting

Picco Power: Easily accessible and visible water fitting

  • Simple adjustment of the correct water volume
    →    This results in rapid operation, even with changing materials
    →    Time savings

 

Picco Power: Low total weight

Picco Power: Low total weight

  • 97 kg with compressor / 65 kg without compressor
    → Compressor can be easily removed from the frame
    → Transporting the mixing pump is therefore very easy

 

Picco Power: High delivery rate

Picco Power: High delivery rate

  • Optional use of D spiral casings

Power range:

13 - 18 l = D 6-3
  8 - 13 l = D 4-½
18 - 27 l = D 8-1/5

Picco Power: Removable drive motor and material hopper

Picco Power: Removable drive motor and material hopper

  • Simpler transport
    →   The machine can therefore also be transported in an estate car

 

Picco Power: Integrated control system

Picco Power: Integrated control system

  • Pneumatic or electric operation
    → Switchable with spray gun, glue gun or radio remote control

 

Picco Power: Advantages at a glance

Picco Power: Advantages at a glance

  • The Picco Power has an unbeatable price-performance ratio
  • Power output: 3.0 kW and 230 V, making a conveyor width of 30 m and a lifting height of 20 m achievable (depending on the material)
  • Machine is much lighter than other machines and also offers a high degree of stability thanks to the stable frame and four wheels
  • Machine with “Made in Germany” quality
  • INOTEC offers a Germany-wide, comprehensive service network
  • Affordable wearing parts
  • Maintenance of third-party and our own products
  • Instruction and training by salaried, very well trained application engineers
Operating pressure: to 30 bar
Operating voltage: 110 or 230 V / 50 Hz / 16 A
Power: 3,0 (frequency-controlled) kW
Flow volume: approx. paste-like ca. 0-18 l/min - mineral ca. 8-30 l/min
Conveying distance: approx. 30 m
Pressure height: approx. 20 m
Grain size: max. 6 mm
Material container: 55 l
Filling: approx. 1.000 mm
Dimensions (L x W x H): 1.560 x 640 x 1.090 mm
Weight: without compressor 65 kg - with compressor 97 kg
INOTEC GmbH inoCOMB Picco Power

Basic module
Item no. 10041148

Scope of delivery
inoCOMB Picco Power:

  • Frame
  • 4 running wheels
  • Material hopper made from stainless steel
  • PU mixing zone
  • Gear motor
  • Rotor/stator D 6-3 Eco-Gold
  • Switching cabinet
  • 15 m, 230 V Schuko / CEE connecting cable
  • Mortar pressure gauge
  • Mixing coil
  • Water fitting
  • Sponge balls with a diameter of 30 mm, 45 mm
  • 25 V / GEKA plaster piece
  • Tool set
  • Operating instructions

Ready-to-spray set
Item no. 10041149

Scope of delivery
inoCOMB Picco Power set:

As with the basic module
(item no. 10041148)

Plus:

  • C 330 PP compressor
  • 10 m mortar hose with a diameter of 25 mm
  • 15 m air hose with a diameter of ½”
  • Straight finishing coat device incl. nozzle with a diameter of 12 mm, 14 mm
  • Assembly spray lubricant
 inoCOMB Picco Power

inoCOMB Picco Power

Cement pastes, suspensions 
Cement plasters 
Concrete bonder 
Decorative fine coats 
ETICS glue, mineral 
ETICS glue, paste-like 
Fine acoustic finishing coats 
Fire protection mortar 
Floating screeds 
Floor spattling compounds 
Lime cement plasters 
Lime plasters 
Lime smoothers 
Liquid woodchip 
Machine-applied gypsum plasters for indoor applications 
Mineral textured plasters 
Multi-layer acoustic spray plasters 
Paste-like textured plasters 
Porous concrete coats 
Renovating plaster systems 
SPCC mortar / filler 
Spray-on spattling compounds 
Multi-purpose hose

Multi-purpose hose

  • For universal use, e.g. air, water
  • GEKA couplings crimped with sleeves on both sides
Technical data:  
Max. operating pressure: max. 15 bar
Temperature range:  -20 up to +90°C

Water / air hose - Ø 1/2“ - Length 10 m (Article no. 10022000)

Water / air hose - Ø 1/2“ - Length 15 m (Article no. 10022001)

Water / air hose - Ø 1/2“ - Length 20 m (Article no. 10022002)

Water / air hose - Ø 3/4“ - Length 20 m (Article no. 10022009)

INOTEC mortar hose

INOTEC mortar hose

  • Abrasion-resistant special hose for pumping highly pressurised wet mortar; largely kink-proof
  • For an operating pressure of 40 bar with 3 times the reliability
  • Yellow on the outside: less heat builds up in the event of sun exposure
  • With mortar hose couplings, M-piece and rotating V-piece (only with diameters of 25 mm)
  • With cam levers on the M-piece
Technical data:  
Operating pressure:  40 bar
Bursting pressure: 120 bar

Inotec mortar hose - Ø 25 mm - Length 10 m (Article no. 10008346-001)

Inotec mortar hose - Ø 25 mm - Length 15 m (Article no. 10008346-002)

Inotec mortar hose - Ø 25 mm - Length 20 m (Article no. 10008346-003)

Inotec mortar hose - Ø 35 mm - Length 10 m (Article no. 10022032)

Inotec mortar hose - Ø 35 mm - Length 20 m (Article no. 10008346-007)

Flushing hose

Flushing hose

  • For clearing blockages in mortar hoses

Flushing hose - Length 10 m (Article no. 10024385)

230 V / 3 x 2.5 mm² connecting cable

230 V / 3 x 2.5 mm² connecting cable

  • 16 A Schuko plug and CEE coupling

230 V / 3 x 2.5 mm² connecting cable - Length 15 m (Article no. 10015126)

Remote control cable with remote control switch

Remote control cable with remote control switch

Remote control cable with remote control switch - Length 16 m (Article no. 10042464)

Remote control cable with remote control switch - Length 32 m (Article no. 10042465)

Remote control extension cable without remote control switch

Remote control extension cable without remote control switch

  • For remote control cable
  • For remote control switch
  • For inoCOLL / inoCOLL Pro one-handed gun

Remote control extension cable without remote control switch - Length 16 m (Article no. 10015210)

Remote control extension cable without remote control switch - Length 32 m (Article no. 10042463)

Remote control switch

Remote control switch

  • With 0.2 m cable, indicator light and 4-pin Harting plug

Remote control switch (Article no. 10015134)

Starting mortar hose with M+V-part

Starting mortar hose with M+V-part

Starting mortar hose with M+V-part (Article no. 10022031)

Hose holder

Hose holder

  • For rapidly fixing hoses to the scaffold

Hose holder (Article no. 10018503)

inoCOLL one-handed gun

inoCOLL one-handed gun

  • For bonding and basecoat mortars
  • 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose
  • For grit sizes up to 1.5 mm

inoCOLL one-handed gun (Article no. 10024144)

inoCOLL PRO one-handed gun

inoCOLL PRO one-handed gun

  • For applying reinforcing mortar and finishing plaster up to 4 mm grit size
  • Operating pressure: up to 40 bar

inoCOLL PRO one-handed gun (Article no. 10041950)

Spray attachment for inoCOLL / PRO one-handed gun  with GEKA air connection

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection

  • For spraying mineral and paste-like products
  • With 10 mm nozzle

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection (Article no. 10039322)

Glue distribution head for inoCOLL / PRO one-handed gun

Glue distribution head for inoCOLL / PRO one-handed gun

The glue distribution head is suitable for applying paste-like glues/dispersion glues to boards, e.g. acoustic boards, insulating boards in the prefabricated construction industry.
The material is applied using hoses that are connected to a glue distribution head and applied at even intervals.
The distribution head is connected to a lockable GEKA coupling on the one-handed gun.
Maximum operating pressure: 10 bar !

Glue distribution head for inoCOLL / PRO (Article no. 10040623)

Small spray pipe – short design

Small spray pipe – short design

  • With 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose (without a nozzle)
  • For grit sizes up to 3.0 mm

Small spray pipe – short design (Article no. 10039887)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

- Spray attachment for inoCOLL / PRO one-handed gun (10039322)
- Small spray pipe (10039887)
- Angled spray head with GEKA coupling (10039457)
- Spray pipe set (10039886)

  • Made from stainless steel

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 4 mm (Article no. 10039271)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 5 mm (Article no. 10042461)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 6 mm (Article no. 10039220)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 8 mm (Article no. 10039221)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 10 mm (Article no. 10039222)

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 13 mm (for grit size up to 6 mm) (Article no. 10040941)

MAI finishing coat device, straight

MAI finishing coat device, straight

  • With 25 mm M-piece coupling
  • Including a 14 mm jet nozzle

MAI finishing coat device, straight (Article no. 10024362)

Jet nozzle

Jet nozzle

  • For MAI finishing coat device

Jet nozzle - Ø 10 mm (Article no. 10024378)

Jet nozzle - Ø 12 mm (Article no. 10024379)

Jet nozzle - Ø 14 mm (Article no. 10024380)

Jet nozzle - Ø 16 mm (Article no. 10024381)

Straight finishing coat device

Straight finishing coat device

  • With 25 mm M-piece coupling
  • Incl. a 14 mm finishing coat nozzle

Straight finishing coat device (Article no. 10024098)

Finishing coat device with sturdy ball valve

Finishing coat device with sturdy ball valve

  • With 25 mm M-piece coupling
  • Including a 14 mm finishing coat nozzle
  • Only permissible in conjunction with the remote control switch

Finishing coat device with sturdy ball valve (Article no. 10024099)

Finishing coat nozzles

Finishing coat nozzles

  • For finishing coat devices, item nos.:
    10024098 / 10024099

Finishing coat nozzles - Ø 10 mm (Article no. 10024089)

Finishing coat nozzles - Ø 12 mm (Article no. 10024090)

Finishing coat nozzles - Ø 14 mm (Article no. 10024091)

Finishing coat nozzles - Ø 16 mm (Article no. 10024093)

Straight decorative plaster spraying device

Straight decorative plaster spraying device

  • Not including nozzle with 25 mm M-piece coupling
  • For grit sizes up to 6.0 mm

Straight decorative plaster spraying device (Article no. 10024246)

Nozzle for straight decorative plaster spraying device

Nozzle for straight decorative plaster spraying device

  • Made from stainless steel

Nozzle for straight decorative plaster spraying device - Ø 8 mm (Article no. 10024071)

Nozzle for straight decorative plaster spraying device - Ø 10 mm (Article no. 10024065)

Nozzle for straight decorative plaster spraying device - Ø 12 mm (Article no. 10024066)

Finishing coat device, long design

Finishing coat device, long design

  • With offset tip
  • Including a 12 mm nozzle

Finishing coat device, long design (Article no. 10040697)

Static mixer

Static mixer

  • Prevents / destroys node in mortar
  • Diameter: 35 mm
  • Length:200 mm
  • incl. Coupling M-piece 35 mm and V-piece 35 mm

Static mixer (Article no. 10042362 )

35 V -> 25 V coupling reducer

35 V -> 25 V coupling reducer

  • For connecting two mortar hoses or reducing the machine outlet.

Coupling reducer 35 V -> 25 V (Article no. 10022101)

Plaster piece with GEKA coupling

Plaster piece with GEKA coupling

  • For cleaning mortar hoses

Plaster piece with GEKA coupling - 25 M-piece (Article no. 10022112)

Plaster piece with GEKA coupling - 25 V-piece (Article no. 10022113)

Plaster piece with GEKA coupling - 35 M-piece (Article no. 10022114)

Sponge balls (soft version)

Sponge balls (soft version)

  • For cleaning material / mortar hoses

Sponge balls (soft version) - Ø 14 mm for hose Ø 13 mm (Article no. 10008116-001)

Sponge balls (soft version) - Ø 20 mm for hose Ø 19 mm (Article no. 10008116-003)

Sponge balls (soft version) - Ø 30 mm for hoseØ 25 mm (Article no. 10008116-004)

Sponge balls (soft version) - Ø 45 mm for hose Ø 35 mm (Article no. 10008116-005)

Sponge balls (solid version)

Sponge balls (solid version)

  • For cleaningmaterial / mortar hoses

Sponge balls (solid version) Ø 30 mm for hose Ø 25 mm (Article no. 10008116-007)

Sponge balls (solid version) Ø 45 mm for hose Ø 35 mm (Article no. 10008116-008)

INOTEC compressor (black) compact C 330 PP, 230 V

INOTEC compressor (black) compact C 330 PP, 230 V

The compact 230 V compressor is excellently suited to a multitude of applications, such as spraying decorative coats, plasters, etc.


Also as an auxiliary compresso for

  • inoCOMB Picco Business
  • inoCOMB Maxi Power
  • inoCOMB M4G Basic
  • inoCOMB Fox

Technical data:

Operating pressure: 10 bar
Suction capacity: 330 l/min
Output: 2,05 kW
Dimensions (L x W x H): 396 x 473 x 598 mm
Weight: ca. 32 kg
More powerful compressors available upon request!

 

INOTEC compressor (black) compact C 330 PP, 230 V (Article no. 10041150)

KAESER 230 V Compressor Premium Car 450/30W

KAESER 230 V Compressor Premium Car 450/30W

The compact 230 volt compressor is ideal for many applications, such as spraying decorative coatings, plaster or bitumen, for operating compressed air tools, and for painting, etc.

Technical data:

Operating pressure:   10 bar
Suction capacity:   450 l/min
Output:   2,2 kW
Dimensions (L x W x H):   870 x 560 x 590 mm
Weight:       86 kg

KAESER 230 V Compressor Premium Car 450/30W (Article no. 10039227)

On request: 400 V external vibrating unit with 5 m cable and 4 x 16 A plug

On request: 400 V external vibrating unit with 5 m cable and 4 x 16 A plug

  • For free-fall conveyor system, for attachment to silos

On request: 400 V external vibrating unit with 5 m cable and 4 x 16 A plug (Article no. 10039440)

On request: INOTEC gypsum delivery hose

On request: INOTEC gypsum delivery hose

  • Complete with C couplings

For delivering dry mortar from the silo to the plastering machine via the delivery system. Abrasion-resistant, flexible at low temperatures, for a BP of 10 bar. Featuring C couplings with special grommets integrated on both sides that guarantee a transition-free flow of material.

Technical data:

 

Hose dimensions:

42 x 7 mm

Operating pressure: 

up to 10 bar

On request: INOTEC gypsum delivery hose - Length 10 m (Article no. 10008342-002)

On request: INOTEC gypsum delivery hose - Length 20 m (Article no. 10008342-001)

Turbomix after mixer (on request)

Turbomix after mixer (on request)

  • Galvanised
  • Volume approx. 2.5 l
  • E.g. for lightweight plaster

Turbomix after mixer (on request) (Article no. 10023220)

Booster pump CTM61 for increasing the water supply

Booster pump CTM61 for increasing the water supply

(Observe local regulations)

  • 230 V / 50 Hz / 0.33 kW
  • incl. connecting cable

Booster pump CTM61 for increasing the water supply (Article no. 10041155)

Mixing coil

Mixing coil

Light material mixing coil, for inoCOMB Picco Power / Picco Business (Article no. 10042441)

Mixing coil for materials that are difficult to evacuate for inoCOMB Picco Power / Picco Business (Article no. 10036255)

Standard mixing coil, for inoCOMB Picco Power/Picco Business (Article no. 10017950)

D4 ½ output conveying screw

D4 ½ output conveying screw

  • Tip marked in green

D4 ½ output conveying screw (Article no. 10022543)

D4-½ conveying screw with tappets for after-mixers

D4-½ conveying screw with tappets for after-mixers

(applies only to D4-½ screw coating with clamping strip art. no. 10022501)

  • Head tipped in green

D4-½ conveying screw with tappets for after-mixers (Article no. 10022546)

D4 ½ output screw casing, soft with clamping strip

D4 ½ output screw casing, soft with clamping strip

D4 ½ output screw casing, soft with clamping strip (Article no. 10022503)

D6-3 Eco Gold conveying screw

D6-3 Eco Gold conveying screw

  • Tip marked in gold

D6-3 Eco Gold conveying screw (Article no. 10022552)

D6-3 Eco Gold screw casing

D6-3 Eco Gold screw casing

  • Without anti-twist protection, colour: gold

 

D6-3 Eco Gold screw casing (Article no. 10022509)

D8-1.5 conveying screw

D8-1.5 conveying screw

  • Tip marked in yellow

D8-1.5 conveying screw (Article no. 10022562)

D8-1.5 conveying screw with tappet for after-mixers

D8-1.5 conveying screw with tappet for after-mixers

  • Tip marked in yellow

D8-1.5 conveying screw with tappet for after-mixers (Article no. 10022563)

D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free) (Article no. 10022517)

D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip (Article no. 10022519)

Rotor D7-2.5 “S”

Rotor D7-2.5 “S”

Rotor D7-2,5 „S“ (Article no. 10022556)

Stator D7-2.5 “Mono Plus” (maintenance free)

Stator D7-2.5 “Mono Plus” (maintenance free)

Stator D7-2.5 “Mono Plus” (maintenance free) (Article no. 10042506)

Assembly spray lubricant

Assembly spray lubricant

  • For assembling the conveying screw and screw casing
  • 400 ml

Assembly spray lubricant (Article no. 10004591)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form inoCOMB Picco Power

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list