Wall & ceiling XL set

VOGT Hammer Wall & ceiling XL setVOGT Hammer Wall & ceiling XL set

VOGT hammers

Wall & ceiling XL set

Tried and tested Vogt hammers for the removal of wall and ceiling coatings


Benefits at a glance    

  • Versatile in use
  • Also suitable for overhead work
  • Proven and solid construction
  • Extra lightweight design for virtually fatigue-free work
  • Vibration-dampened version available

When it comes to wall and overhead work, lightweight tools play an essential role. If the device is too heavy, work performance will be reduced over time.
Wall and ceiling coatings are best removed with the lightweight devices VH 25-90.14-XL / VH 30-90.14-XL. The entire floor height can be reached when the recommended device is used.

Areas of application
Interior, ceiling and exterior plasters, thermal insulation composite systems, glued tiles, decorative coatings and much more.


Further information / downloads:


Alternative Machines:

Dimensions (L): 900 mm
Weight: 3,5 kg / 4,3 kg
VOGT Hammer Wall & ceiling XL set

XL set
Vogt hammer
VH 25-90.14-XL
Item no. 10042578

Tools

  • Delta-P knife M 410 UP
  • Wide chisel M 340
  • Wide chisel M 200
  • Scraper holder M 5000
  • Scraper B 100 S
  • Scraper B 120 S
  • Scraper B 160 S


Occupational health and safety

  • Work gloves, safety goggles, earplugs


Accessories

  • Adapter 3/4 inch to standard connection Z 200 S
  • Precision lubricator Z 300 S
  • Pneumatic hose 10 m
  • VOGT special oil 0.1 l / VOGT special oil 1.0 l
  • Ring spanner 15/19
  • Metal transport case
  • Operating instructions

XL set
Vogt hammer (vibration-dampened):
VH 30-90.14-XL
Item no. 10042579

Tools

  • Delta-P knife M 410 UP
  • Wide chisel M 340
  • Wide chisel M 200
  • Scraper holder M 5000
  • Scraper B 100 S
  • Scraper B 120 S
  • Scraper B 160 S


Occupational health and safety

  • Work gloves, safety goggles, earplugs


Accessories

  • Adapter 3/4 inch to standard connection Z 200 S
  • Precision lubricator Z 300 S
  • Pneumatic hose 10 m
  • VOGT special oil 0.1 l / VOGT special oil 1.0 l
  • Ring spanner 15/19
  • Metal transport case
  • Operating instructions
Delta-P knife

Delta-P knife

  • angled with undercut

Areas of application:
Lime and gypsum plaster, parquet, laminate, bitumen, strong tiles, natural stone slabs, magnesite-bonded, lightweight wooden boards, gypsum boards, slats

Delta-P knife (Chisel housing 14 mm) Length / Width: 300/100 mm (Article no. 10019776)

Delta-P knife (Chisel housing 14 mm) Length / Width: 300/80 mm (Article no. 10042585)

Flat chisel

Flat chisel

Areas of application:
Concrete, rock, masonry, composite screed, thick-set tiles, cement plaster

Flat chisel (Chisel housing 14 mm) Length / Width: 260/25 mm (Article no. 10019871)

Wide chisel

Wide chisel

Areas of application:
Stubborn plaster, masonry, thick-set tiles, floating screed

Wide chisel (Chisel housing 14 mm) Length / Width: 260/40 mm (Article no. 10019768)

Scraper holder for scrapers

Scraper holder for scrapers

  • angled, with mounting kit

Scraper holder (Chisel housing 14 mm) Length / Width: 300/100 mm (Article no. 10020061)

Scraper Version 1 (see Areas of application)

Scraper Version 1 (see Areas of application)

  • sharpened

Areas of application:
Plaster on a level surface, coatings, thin plaster, spray asbestos, glued tiles, glue residues, concrete residues and overhangs, road markings

Scraper Version 1 (see Areas of application) Length / Width: 120/100 mm (Article no. 10020057)

Scraper Version 1 (see Areas of application) Length / Width: 120/120 mm (Article no. 10020058)

Scraper Version 2 (see Areas of application)

Scraper Version 2 (see Areas of application)

  • sharpened

Areas of application:
Bitumen, glue, paint and filler residue; PVC, CV, linoleum and rubber coverings; cork; needle felt; carpet; ball yarn

Scraper Version 2 (see Areas of application) Length / Width: 120/160 mm (Article no. 10020059)

Scraper Version 2 (see Areas of application) Length / Width: 120/200 mm (Article no. 10020060)

Cross blade holder with cross blade

Cross blade holder with cross blade

  • for the cutting of soft flooring in any width

Can be used in combination with a scraper and scraper holder.

Cross blade holder with cross blade (Article no. 10019945)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form Wall & ceiling XL set

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list