|
|
 |
|
Unlike many traditional agitators, the VISCO JET® agitator system offers many benefits, particularly in explosion hazard applications. The most important of them are:
Short mix times
The conical mixing elements generate high-momentum vorticities. Through the “nozzle principle” these produce an additional acceleration and amalgamation of the mixture.
No air intake
No air is drawn in during the mixing process. In intermittent operation and at reduced circumferential speeds, the air in the mixture can actually be reduced.
No frothing
Low rotation speeds and no intake of air means there is no frothing.
No warming
Because of the low rotation speeds and short mix times, there is no significant warming of the mix medium.
Product-friendly
The dynamic pressure principle, in which the medium passes through the displacement body in laminar flows, ensures particularly product friendly mixing.
Energy saving
In most applications, VISCO JET® agitation technology requires about 1/3 of the energy used by traditional agitator systems.
Level number and additional fixtures
With VISCO JET® agitation technology, no troublesome additional container fixtures such as current breakers and shaft guide bearings are required. Moreover, only one mixing element level is required, even with very large container volumes, for example 250m³. This is a major benefit, especially for applications with higher cleaning and sterilisation requirements.
One for all
Unlike traditional agitator systems, which can be completely different depending on application, with patented VISCO JET® agitation technology, you can use “the one and only VISCO JET® mixing element“ for almost any application.
Light construction
Low drive capacities and radial forces on the mixing element produce significantly lower momentum and therefore smaller shaft dimensions.
|
|
|