Battery powered hot wire cutter for wireless use with ETICS insulation boards

Benefits at a glance

  • Up to 250 cuts with one charge*
  • Work without a power supply
  • No cable reels and no cable lying around
  • Push button operation prevents unwanted battery usage
  • Supporting rails on both sides with panel guides
  • Integrated corner cutting guides and freestanding support
  • Railing fastening (strap) to prevent tipping over
    * Cuts over the short panel length using the eco setting which only heats the wire up over a limited length (max. 62 cm) and new, fully charged battery. More than 100 cuts possible across the entire length of the panel. Cutting performance depends on the ambient temperature. The natural ageing of batteries will decrease the cutting performance.

The new hot wire cutting device inoCUT ic128 Akku also works reliably without a socket, thanks to a high-performance lithium-ion battery (18 V / 6 Ah). Wireless and flexible cutting permits up to 100 cuts across the entire length of the panel and 250 cuts across the short side of the insulation board. An 18 V / 9Ah battery can also be used, allowing for up to 500 cuts per battery charge. Rafter beam and corner cut-outs for window sills are also easily achievable with the optional corner cutter.

 

inoCUT ic128 Akku
Operating voltageV/Hz/A6 Ah / 18 / - / -
Cutting lengthcmmax. 128
Cutting depthcmmax. 45° = 20 cm / 90° = 30
Machine techniqueCutters
Dimensions (W x H x D)mm415 x 1850 x 150
Weightkgapprox. 13,5
inoCUT
inoCUT ic128 Akku
Corkboard
Foam glass panels
Hemp boards
Mineral wool
Phenolic resin panels
Polystyrene rigid foam panels
Polyurethane panels
Potential cuts: Cut-outs
Potential cuts: Diagonal cuts
Potential cuts: Diagonal cuts with mitre joints
Potential cuts: Groove cuts
Potential cuts: Layered cut
Potential cuts: Layered cuts with mitre joints
Potential cuts: Layered groove cuts
Potential cuts: Mitre cuts
Potential cuts: Separating cuts
Potential cuts: Straight cuts

Scope of delivery
inoCUT ic128 Battery
Item no. 10043424

  • Base plate
  • Swivelling cutting bracket
  • Left-hand and right-hand support strip with integrated corner cutting guides
  • 2 x Batteries 18 V / 6 Ah
  • High-speed charger
  • Depth stop for rebating, grooving and separating cuts
  • Freestanding support
  • Swivel base
  • Railing fastening (strap)
  • Operating instructions
inoCUT ic128 Akku
Corner cutter for inoCUT ic128

Corner cutter for inoCUT ic128

  • Rafter cutouts, corner cutouts in window sills, plasterboard, lintels, etc.
  • 0 - 90° swivel
  • Degree scale and slider for diagonal cut repetitions
  • Tool-free, fast wire change thanks to integrated reserve wire spool
  • Separate transformer
  • With nylon pouch

Corner cutter for inoCUT ic128 (Article No. 10042900)
Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm (Article No. 10039890)

Inquiry: inoCUT ic128 Akku



* Required