DeutschEnglish

Shot blaster system S210E40R Streamer

 Shot blaster system S210E40R Streamer Shot blaster system S210E40R Streamer

Floor processing

Shot blaster system S210E40R Streamer

The S210E40R Streamer is the “espresso” of shot blasters


Benefits at a glance    

  • Powerful impeller motor
  • Height-adjustable steering arm, with integrated control elements.
  • Multi-adjustable feed thanks to powerful three-phase drive
  • Extremely good handling

The compact and robust design of the S210E40R Streamer, as well as its easy handling, make it easy to use even in hard-to-reach areas.
The powerful three-phase drive allows a multi-adjustable feed. Main areas of application include corridors, garages, terraces, cellars, landings, loading ramps, etc.
To generate the optimum blast output, we recommend using the S210E40R Streamer along with one of the filter systems in the series DUSTCOM 3003AR.

 


Further information / downloads:


Alternative Machines:

Operating voltage: 400 V / 50 Hz / 16 A
Power: 4,0 kW
Dimensions (L x W x H): 1.100 x 300 x 1.000 mm
Weight: 114 kg
Working width: 210 mm
Beam power on concrete: 80 m²/h
Filter connection: Ø 50 mm
Rotations: continuously variable 0 - 18 min-1
 Shot blaster system S210E40R Streamer

Scope of delivery
Streamer S210E40R Set
Item no. 10030022

  • STREAMER S210E40R shot blaster
  • Abrasive S330, 300 kg
  • Filter system DC 3003AR, incl. filter cartridges
  • Dust hose Ø 50 mm, 10 m
  • Magnetic brush 500 mm
  • Maintenance box
  • Operating instructions
 Shot blaster system S210E40R Streamer

Shot blaster system S210E40R Streamer

Blasting EP and PU coatings 
EP and PU coatings: Removal of old coatings, roughening of new coatings, roughening of concrete or screed 
Industrial flooring: Restoration and remedy 
Keying and removal of mineral substrates 
Natural and artificial stone, terrazzo: grinding of slabs made of artificial stone, hard and soft stone up to polishing, grinding and honing of terrazzo 
Remedy of surface roughness 
Removal of sanding bridges and blast tracks 
Removal of sealants and thin coatings 
Screed: Grinding and polishing, tackling irregularities 
Shot-blasting of concrete, screed and asphalt to remove cement slurry and for substrate preparation 
Shot-blasting of steel to remove sinter layers and for rust removal 
Topsoil transfer: substrate preparation, removal of spattling compounds and adhesive residues 
S210E40R maintenance box

S210E40R maintenance box

  • 1 x toolbox (410 x 240 x 250 mm),
  • 1 x of each spanner 10x11, 13x17, 17x19,
  • 1 x of each wrench socket 10, 13, 17, 19, 8 x 100 mm,
  • 1 x lever reversible ratchet,
  • 1 x flat head screwdriver 5.5 x 1.0 x 100,
  • 1 x machinist’s hammer 500 g,
  • 1 x hexagonal pin wrench 6 mm,  
  • 1 x pair safety goggles,
  • 2 x impeller set 165 mm,
  • 1 x of each cladding: top, right, left,
  • 1 x abrasive control cable,
  • 1 x flat belt,
  • 1 x of each brush seal: left, right, front, rear,
  • 1 x metal seal: rear

S210E40R maintenance box (Article no. 10030037)

Magnetic brush 500 mm for smaller surfaces (20 m² to 100 m²)

Magnetic brush 500 mm for smaller surfaces (20 m² to 100 m²)

  • For recovering abrasive residues from depressions and joints and for their reuse in the abrasive cycle

 

Magnetic brush 500 mm for smaller surfaces (20 m² to 100 m²) (Article no. 10030039)

Magnet trolley 700 mm with higher absorption capacity

Magnet trolley 700 mm with higher absorption capacity

  • For recovering abrasive residues from depressions and joints and for their reuse in the abrasive cycle

Magnet trolley 700 mm with higher absorption capacity (Article no. 10030040)

Abrasive (1 bag, 25 kg)

Abrasive (1 bag, 25 kg)

IMPACTOR GL 18 (sharp-edged, for increasing the roughness depth and for the effective removal of thin coatings (for max. 20 % admixture) (Article no. 10030044)

IMPACTOR S330 (for an extra-fine profile − also as admixture) (Article no. 10030042)

IMPACTOR S390 (standard abrasive) (Article no. 10030043)

Filter system DUSTCOM 3003AR

Filter system DUSTCOM 3003AR

The IMPACTS filter systems DUSTCOM 3003AR are particularly robust units with fully-automatic filter cartridge dedusting. Three turbines each with 1000 watt drive power form the basis of their exceptional performance. In conjunction with the 3 m² filter surface, the excellent automatic dedusting and the simple operation of the dust collector, the IMPACTS filter system DC3003AR sets new standards.

  • Standard version: Dust class M

Filter system DUSTCOM 3003AR (Article no. 10030047)

Filter cartridge for filter system Dustcom DC3003AR

Filter cartridge for filter system Dustcom DC3003AR

Filter medium suitable for all dry mineral dusts.

  • Dust class M

Filter cartridge for filter system Dustcom DC3003AR (Article no. 10030048)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form Shot blaster system S210E40R Streamer

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list