The light and compact 230 V* mixing pump for mineral and paste-like materials

Benefits at a glance

  • Power output: 3.0 kW and 230 V, making a conveyor width of 30 m and a lifting height of 20 m achievable
  • Continuously variable delivery rate
  • Material hopper made from stainless steel
  • Simple cleaning thanks to PU mixing zone
  • Powerful compressor – can also be used for processing decorative finish coatings
  • The total weight without compressor is only 65 kg! This therefore allows for easy transport.

OWCThe inoCOMB Picco Power is a trendsetter among compact 230 V mixing pumps. With its power output, a conveyor width of 30 m and a lifting height of 20 m are easily achievable. As a result, the Picco Power – even without high-voltage current – is very versatile on any construction site.
Parts that come into contact with materials, such as the hopper, mixing shaft, pump flange and protective screen, are made of high-quality stainless steel.
The simple operation and easy-to-clean PU mixing zone ensure smooth operation right from the start.

Together with the dry delivery unit inoFLEX, the mixing pump Picco Power process the material out of the one-way container.

_______________

* The machine is also available in 110 V

 

inoCOMB Picco Power

Service details

Services
Picco Power: 230 V mixing pump

Picco Power: 230 V mixing pump

  • No high-voltage current required, yet still very powerful.
    → Can be used on any construction site with lighting current connection

 

Picco Power: 3.0 kW drive motor

Picco Power: 3.0 kW drive motor

  • Powerful, frequency-controlled
    → High variable adjustment of delivery rate

 

Picco Power: Drive motor with foldable sides

Picco Power: Drive motor with foldable sides

  • Sides can be folded away
    → Good accessibility to mixing coil
  •  Electrically locked
    → Security for the operator
Picco Power: Material hopper made of stainless steel with protective grating

Picco Power: Material hopper made of stainless steel with protective grating

  • Stable material for the harsh conditions found on construction sites
    →     Long container service life
    →     The processing of mineral and pasty materials is possible
  • No material deposits
    →     Quick and easy to clean
  • No paint chipping or rust particles
    →     No deposits of organic materials
  • Contract protection thanks to protective grating
    →     Security for the operator
 Picco Power: Polyurethane mixing zone

Picco Power: Polyurethane mixing zone

  • No material deposits
    → Durable material
    → Low wear and tear
    → Easy to clean
    → Low amount of time required for cleaning
    → Good mixing result
    → Cost savings
Picco Power: Ergonomic switching cabinet

Picco Power: Ergonomic switching cabinet

  • Clearly structured, well laid out and easily accessible controls
    → Very simple operation
Picco Power: Can be connected to OWC containers

Picco Power: Can be connected to OWC containers

  • Automatic filling from an OWC (one way container) using the flexible inoFLEX delivery unit
    → No carrying of bagged goods
    → No more manual filling
    → Time savings
    → No dust formation
    → Constant, steady material consistency
Picco Power: Compressor integrated in the frame (optional accessory)

Picco Power: Compressor integrated in the frame (optional accessory)

  • Compressor is removable
    → Thus also suitable for other machines and applications
    → Good protection for compressor and water fitting

 

Picco Power optional accessories: Powerful compressor with pressure switch INOTEC compressor compact C 330 PP

Picco Power optional accessories: Powerful compressor with pressure switch INOTEC compressor compact C 330 PP

  • High air capacity
    → Wide range of applications
    → Ready-to-spray, decorative coatings are therefore possible


 

Picco Power: Robust tubular frame with puncture-free, construction site-compliant running wheels

Picco Power: Robust tubular frame with puncture-free, construction site-compliant running wheels

  • Solid construction / 4 wheels
    → No punctures
    → Durable construction
    → Simple and safe movement on site
    → Good stability
Picco Power: Easily accessible and visible water fitting

Picco Power: Easily accessible and visible water fitting

  • Simple adjustment of the correct water volume
    →    This results in rapid operation, even with changing materials
    →    Time savings

 

Picco Power: Low total weight

Picco Power: Low total weight

  • 97 kg with compressor / 65 kg without compressor
    → Compressor can be easily removed from the frame
    → Transporting the mixing pump is therefore very easy

 

Picco Power: High delivery rate

Picco Power: High delivery rate

  • Optional use of D spiral casings

Power range:

13 - 18 l = D 6-3
  8 - 13 l = D 4-½
18 - 27 l = D 8-1/5

Picco Power: Removable drive motor and material hopper

Picco Power: Removable drive motor and material hopper

  • Simpler transport
    →   The machine can therefore also be transported in an estate car

 

Picco Power: Integrated control system

Picco Power: Integrated control system

  • Pneumatic or electric operation
    → Switchable with spray gun, glue gun or radio remote control

 

Picco Power: Advantages at a glance

Picco Power: Advantages at a glance

  • The Picco Power has an unbeatable price-performance ratio
  • Power output: 3.0 kW and 230 V, making a conveyor width of 30 m and a lifting height of 20 m achievable (depending on the material)
  • Machine is much lighter than other machines and also offers a high degree of stability thanks to the stable frame and four wheels
  • Machine with “Made in Germany” quality
  • INOTEC offers a Germany-wide, comprehensive service network
  • Affordable wearing parts
  • Maintenance of third-party and our own products
  • Instruction and training by salaried, very well trained application engineers
Operating pressurebarup to 30
Operating voltageV/Hz/A110-230 / 50 / 16
Drive performancekW3,0 (frequency controlled)
Delivery rate (mineral materials)l/minmax. 8-30
Delivery rate (pasty materials)l/minmax. 0-18
Conveying distance (mineral materials)mmax. 30
Pressure height (mineral materials)mmax. 20
Grain sizemmmax. 6
Material containerl55
Fillingmmapprox. 1.000
Machine techniqueMixing pumps
Comments* Weight with compressor: approx. 97 kg
Dimensions (L x W x H)mm1560 x 640 x 1090
Weightkgapprox. 65
inoCOMB
inoCOMB Picco Power
Cement pastes, suspensions
Cement plasters
Concrete bonder
Decorative fine coats
ETICS glue, mineral
ETICS glue, paste-like
Fine acoustic finishing coats
Fire protection mortar
Floating screeds
Floor spattling compounds
Lime cement plasters
Lime plasters
Lime smoothers
Liquid woodchip
Machine-applied gypsum plasters for indoor applications
Mineral textured plasters
Multi-layer acoustic spray plasters
Paste-like textured plasters
Porous concrete coats
Renovating plaster systems
SPCC mortar / filler
Spray-on spattling compounds

Basic module
Item no. 10041148
Scope of delivery
inoCOMB Picco Power:

  • Frame
  • 4 running wheels
  • Material hopper made from stainless steel
  • PU mixing zone
  • Gear motor
  • Rotor/stator D 7-2.5 “Mono Plus”
  • Switching cabinet
  • 15 m, 230 V Schuko / CEE connecting cable
  • Mortar pressure gauge
  • Mixing coil
  • Water fitting
  • Sponge balls with a diameter of 30 mm, 45 mm
  • 25 V / GEKA plaster piece
  • Tool set
  • Operating instructions

Ready-to-spray set
Item no. 10041149
Scope of delivery
inoCOMB Picco Power set:
As with the basic module
(item no. 10041148)
Plus:

  • C 330 PP compressor
  • 10 m mortar hose with a diameter of 25 mm
  • 15 m air hose with a diameter of ½”
  • Straight finishing coat device incl. nozzle with a diameter of 12 mm, 14 mm
  • Assembly spray lubricant
inoCOMB Picco Power
Multi-purpose hose

Multi-purpose hose

  • For universal use, e.g. air, water
  • GEKA couplings crimped with sleeves on both sides
Technical data:
Max. operating pressure: max. 15 bar
Temperature range: -20 up to +90°C

Water / air hose - Ø 1/2“ - Length 10 m (Article No. 10022000)
Water / air hose - Ø 1/2“ - Length 15 m (Article No. 10022001)
Water / air hose - Ø 1/2“ - Length 20 m (Article No. 10022002)
Water / air hose - Ø 3/4“ - Length 20 m (Article No. 10022011)
INOTEC mortar hose

INOTEC mortar hose

  • Abrasion-resistant special hose for pumping highly pressurised wet mortar; largely kink-proof
  • For an operating pressure of 40 bar with 3 times the reliability
  • Yellow on the outside: less heat builds up in the event of sun exposure
  • With mortar hose couplings, M-piece and rotating V-piece (only with diameters of 25 mm)
  • With cam levers on the M-piece
Technical data:
Operating pressure: 40 bar
Bursting pressure: 120 bar

Inotec mortar hose - Ø 25 mm - Length 10 m (Article No. 10008346-001)
Inotec mortar hose - Ø 25 mm - Length 15 m (Article No. 10008346-002)
Inotec mortar hose - Ø 25 mm - Length 20 m (Article No. 10008346-003)
Inotec mortar hose - Ø 35 mm - Length 10 m (Article No. 10022032)
Inotec mortar hose - Ø 35 mm - Length 20 m (Article No. 10008346-007)
Flushing hose

Flushing hose

  • For clearing blockages in mortar hoses

Flushing hose - Length 10 m (Article No. 10024385)
230 V / 3 x 2.5 mm² connecting cable

230 V / 3 x 2.5 mm² connecting cable

  • 16 A Schuko plug and CEE coupling

230 V / 3 x 2.5 mm² connecting cable - Length 15 m (Article No. 10015126)
Wireless remote control

Wireless remote control

  • Wireless remote control, 3-channels, with handheld transmitter integrated antenna, 24 V Harting connector with LED display
  • Only for devices with a control voltage of 12-24 V

Wireless remote control (Article No. 10043315)
Remote control cable with remote control switch

Remote control cable with remote control switch

Remote control cable with remote control switch - Length 16 m (Article No. 10042464)
Remote control cable with remote control switch - Length 32 m (Article No. 10042465)
Remote control extension cable without remote control switch

Remote control extension cable without remote control switch

  • For remote control cable
  • For remote control switch
  • For inoCOLL / inoCOLL Pro one-handed gun

Remote control extension cable without remote control switch - Length 16 m (Article No. 10015210)
Remote control extension cable without remote control switch - Length 32 m (Article No. 10042463)
Remote control switch

Remote control switch

  • With 0.2 m cable, indicator light and 4-pin Harting plug

Remote control switch (Article No. 10015134)
Plastic hose connector with V Part

Plastic hose connector with V Part

  • Ø 35 mm
  • Length: 0,3 m

Plastic hose connector with V Part (Article No. 10038433)
Hose holder

Hose holder

  • For rapidly fixing hoses to the scaffold

Hose holder (Article No. 10018503)
inoCOLL one-handed gun

inoCOLL one-handed gun

  • For bonding and basecoat mortars
  • 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose
  • For grit sizes up to 1.5 mm

inoCOLL one-handed gun (Article No. 10024144)
inoCOLL PRO one-handed gun

inoCOLL PRO one-handed gun

  • For applying reinforcing mortar and finishing plaster up to 4 mm grit size
  • Operating pressure: up to 40 bar

inoCOLL PRO one-handed gun (Article No. 10041950)
Spray attachment for inoCOLL / PRO one-handed gun  with GEKA air connection

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection

  • For spraying mineral and paste-like products
  • With 10 mm nozzle

Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection (Article No. 10039322)
Small spray pipe – short design

Small spray pipe – short design

  • With 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose (without a nozzle)
  • For grit sizes up to 3.0 mm

Small spray pipe – short design (Article No. 10039887)
Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886

- Spray attachment for inoCOLL / PRO one-handed gun (10039322)
- Small spray pipe (10039887)
- Angled spray head with GEKA coupling (10039457)
- Spray pipe set (10039886)

  • Made from stainless steel

Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 4 mm (Article No. 10039271)
Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 5 mm (Article No. 10042461)
Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 6 mm (Article No. 10039220)
Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 8 mm (Article No. 10039221)
Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 10 mm (Article No. 10039222)
Nozzles for Item no. 10039322 / 10039887 / 10039457 / 10039886 - Ø 13 mm (for grit size up to 6 mm) (Article No. 10040941)
MAI finishing coat device, straight

MAI finishing coat device, straight

  • With 25 mm M-piece coupling
  • Including a 14 mm jet nozzle

MAI finishing coat device, straight (Article No. 10024362)
Jet nozzle

Jet nozzle

  • For MAI finishing coat device

Jet nozzle - Ø 10 mm (Article No. 10024378)
Jet nozzle - Ø 12 mm (Article No. 10024379)
Jet nozzle - Ø 14 mm (Article No. 10024380)
Jet nozzle - Ø 16 mm (Article No. 10024381)
Straight finishing coat device

Straight finishing coat device

  • With 25 mm M-piece coupling
  • Incl. a 14 mm finishing coat nozzle

Straight finishing coat device (Article No. 10024098)
Finishing coat nozzles

Finishing coat nozzles

  • For finishing coat devices, item nos.:
    10024098 / 10024099

Finishing coat nozzles - Ø 10 mm (Article No. 10024089)
Finishing coat nozzles - Ø 12 mm (Article No. 10024090)
Finishing coat nozzles - Ø 14 mm (Article No. 10024091)
Finishing coat nozzles - Ø 16 mm (Article No. 10024093)
Straight decorative plaster spraying device

Straight decorative plaster spraying device

  • Not including nozzle with 25 mm M-piece coupling
  • For grit sizes up to 6.0 mm

Straight decorative plaster spraying device (Article No. 10024246)
Nozzle for straight decorative plaster spraying device

Nozzle for straight decorative plaster spraying device

  • Made from stainless steel

Nozzle for straight decorative plaster spraying device - Ø 8 mm (Article No. 10024071)
Nozzle for straight decorative plaster spraying device - Ø 10 mm (Article No. 10024065)
Nozzle for straight decorative plaster spraying device - Ø 12 mm (Article No. 10024066)
Finishing coat device, long design

Finishing coat device, long design

  • With offset tip
  • Including a 12 mm nozzle

Finishing coat device, long design (Article No. 10040697)
Static mixer

Static mixer

  • Prevents / destroys node in mortar
  • Diameter: 35 mm
  • Length:200 mm
  • incl. Coupling M-piece 35 mm and V-piece 35 mm

Static mixer (Article No. 10042362 )
Coupling reducer

Coupling reducer

  • For connecting two mortar hoses or reducing the machine outlet.

Coupling reducer 35 V -> 25 V (Article No. 10022101)
Plaster piece for cleaning mortar hoses

Plaster piece for cleaning mortar hoses

Plaster piece with GEKA coupling - 25 M-piece (Article No. 10022112)
Plaster piece with GEKA coupling - 25 V-piece (Article No. 10022113)
Plaster piece with GEKA coupling - 35 M-piece (Article No. 10022114)
Sponge balls (soft version)

Sponge balls (soft version)

  • For cleaning material / mortar hoses

Sponge balls (soft version) - Ø 14 mm for hose Ø 13 mm (Article No. 10008116-001)
Sponge balls (soft version) - Ø 20 mm for hose Ø 19 mm (Article No. 10008116-003)
Sponge balls (soft version) - Ø 30 mm for hoseØ 25 mm (Article No. 10008116-004)
Sponge balls (soft version) - Ø 45 mm for hose Ø 35 mm (Article No. 10008116-005)
Sponge balls (solid version)

Sponge balls (solid version)

  • For cleaningmaterial / mortar hoses

Sponge balls (solid version) Ø 30 mm for hose Ø 25 mm (Article No. 10008116-007)
Sponge balls (solid version) Ø 45 mm for hose Ø 35 mm (Article No. 10008116-008)

(Article No. 10015059)
INOTEC compressor (black) compact C 330 PP, 230 V including pressure switch

INOTEC compressor (black) compact C 330 PP, 230 V including pressure switch

The compact 230 V compressor is excellently suited to a multitude of applications, such as spraying decorative coats, plasters, etc.


Also as an auxiliary compresso for

  • inoCOMB Picco Business
  • inoCOMB Maxi Power
  • inoCOMB M4G Basic
  • inoCOMB Fox

Technical data:

Operating pressure: 10 bar
Suction capacity: 330 l/min
Output: 2,05 kW
Dimensions (L x W x H): 396 x 473 x 598 mm
Weight: ca. 32 kg
More powerful compressors available upon request!

INOTEC compressor (black) compact C 330 PP, 230 V (Article No. 10041150)
KAESER 230 V Compressor Premium Car 450/30W

KAESER 230 V Compressor Premium Car 450/30W

The compact 230 volt compressor is ideal for many applications, such as spraying decorative coatings, plaster or bitumen, for operating compressed air tools, and for painting, etc.

Technical data:

Operating pressure: 10 bar
Suction capacity: 450 l/min
Output: 2,2 kW
Dimensions (L x W x H): 870 x 560 x 590 mm
Weight: 86 kg

KAESER 230 V Compressor Premium Car 450/30W (Article No. 10039227)
On request: INOTEC gypsum delivery hose

On request: INOTEC gypsum delivery hose

  • Complete with C couplings

For delivering dry mortar from the silo to the plastering machine via the delivery system. Abrasion-resistant, flexible at low temperatures, for a BP of 10 bar. Featuring C couplings with special grommets integrated on both sides that guarantee a transition-free flow of material.

Technical data:

Hose dimensions:

42 x 7 mm

Operating pressure:

up to 10 bar

On request: INOTEC gypsum delivery hose - Length 10 m (Article No. 10008342-002)
On request: INOTEC gypsum delivery hose - Length 20 m (Article No. 10008342-001)
Booster pump CTM61 for increasing the water supply

Booster pump CTM61 for increasing the water supply

(Observe local regulations)

  • 230 V / 50 Hz / 0.33 kW
  • incl. connecting cable

Booster pump CTM61 for increasing the water supply (Article No. 10041155)
Mixing coil

Mixing coil

Light material mixing coil, for inoCOMB Picco Power (Article No. 10042441)
Mixing coil for materials that are difficult to evacuate for inoCOMB Picco Power (Article No. 10036255)
Standard mixing coil, for inoCOMB Picco Power (Article No. 10017950)
D4 ½ output conveying screw - Head marked in green

D4 ½ output conveying screw - Head marked in green

D4 ½ output conveying screw - Head marked in green (Article No. 10022543)
D4-½ conveying screw with tappets for after-mixers

D4-½ conveying screw with tappets for after-mixers

(applies only to D4-½ screw coating with clamping strip art. no. 10022501)

  • Head tipped in green

D4-½ conveying screw with tappets for after-mixers (Article No. 10022546)
D4 ½ output screw casing, soft with clamping strip

D4 ½ output screw casing, soft with clamping strip

D4 ½ output screw casing, soft with clamping strip (Article No. 10022503)
D6-3 Eco Gold conveying screw

D6-3 Eco Gold conveying screw

  • Tip marked in gold

D6-3 Eco Gold conveying screw (Article No. 10022552)
D6-3 Eco Gold screw casing

D6-3 Eco Gold screw casing

  • Without anti-twist protection, colour: gold

D6-3 Eco Gold screw casing (Article No. 10022509)
D8-1.5 conveying screw

D8-1.5 conveying screw

  • Tip marked in yellow

D8-1.5 conveying screw (Article No. 10022562)
D8-1.5 conveying screw with tappet for after-mixers

D8-1.5 conveying screw with tappet for after-mixers

  • Tip marked in yellow

D8-1.5 conveying screw with tappet for after-mixers (Article No. 10022563)
D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free)

D8-1.5 yellow screw casing (maintenance free) (Article No. 10022517)
D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip

D8-1.5 yellow screw casing with clamping strip (Article No. 10022519)
Rotor D7-2.5 “S”

Rotor D7-2.5 “S”

Rotor D7-2,5 „S“ (Article No. 10022556)
Stator D7-2.5 “Mono Plus” (maintenance free)

Stator D7-2.5 “Mono Plus” (maintenance free)

Stator D7-2.5 “Mono Plus” (maintenance free) (Article No. 10042506)
Assembly spray lubricant

Assembly spray lubricant

  • For assembling the conveying screw and screw casing
  • 400 ml

Assembly spray lubricant (Article No. 10004591)

Inquiry: inoCOMB Picco Power



* Required