DeutschEnglish

Powdery materials: OWC in combination with two dry delivery unit for a small silo

 Powdery materials: OWC in combination with two dry delivery unit for a small silo Powdery materials: OWC in combination with two dry delivery unit for a small silo

OWC Machine technology

Powdery materials: OWC in combination with two dry delivery unit for a small silo

Powdery materials: OWC in combination with two dry delivery units inoFLEX Duo for connection to the inoCOMB Cabrio small silo


inoFLEX DUO
Advantages at a glance

  • Extremely simple assembly on the small silo inoCOMB Cabrio
  • Dust-free work
  • High delivery rate thanks to the continuous filling of the small silo, which is equipped with a 400 V continuous mixer and a 400 V delivery pump.
  •  Low-maintenance technology
  •  Simple cleaning

OWCBoth flexible delivery shafts of the inoFLEX Duo transport the powdery material to be processed from the one-way container directly to the vessel of the inoCOMB Cabrio small silo.
Here the material is mixed with water using high-performance machine technology and then pumped on-site through the material hose. Areas of application of this closed, dust-free system include horizontal floor levelling in parking garages or industrial halls, large-scale reprofiling in tunnels and on bridges, or the grouting of channels and machine foundations.
inoCOMB Cabrio 0.2
The small silo is available in two versions:
inoCOMB Cabrio “R” for pouring ready-mixed mortar
and inoCOMB Cabrio “D” for spray application of ready-mixed mortar


Further information / downloads:


Alternative Machines:

 

Operating voltage: 230 V / 50 Hz
Flow volume: approx. 2 x 24 l/min
Connection Port: flexible
Machine technique: OWC Machine technology
 Powdery materials: OWC in combination with two dry delivery unit for a small silo

Scope of delivery
inoFLEX Duo
Item no. 10042432

  • 2 x OWC Camlock coupling
  • 2 x flexible hose, approx. 2 m
  • 2 x delivery shaft
  • 2 x probe control system with rotor sensor
  • 2 x gear motor
  • 1 x transition hood with 2 transition connecting pieces
  • Operating instructions
Delivery shaft for inoFLEX

Delivery shaft for inoFLEX

Delivery shaft for inoFLEX (Article no. 10041423)

Sales contact

Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665



Request form Powdery materials: OWC in combination with two dry delivery unit for a small silo

* These fields must be filled out

 

CAPTCHA image

Field must be filled out.



Back to machine list