The small silo for bagged goods, big bags and one-way containers with integrated 400 V continuous mixer and 400 V delivery pump for spray applications with ready-mixed mortar

Benefits at a glance    

  • Can be used for all pumpable, powdery ready-mixed mortar
  • Powerful 400 V machine technology
  • Very high delivery rate
  • Continuously variable speed control
  • Simple to operate
  • Easy-to-clean thanks to PU mixing pipe
  • Filling with bagged goods is standard. The small silo can also be filled with big bags or one-way containers

The inoCOMB Cabrio small silo is the ideal solution for anywhere that a lot of material has to be processed in a short amount of time. Machine technology is used to ensure the smooth application on the construction site of the high-performance 400 V continuous mixer and the tried-and-tested delivery pump.

The small silo can be loaded with bagged goods, big bags via an optional attachment hood or with one-way containers.

With the optional add-on conversion kit “R”, floor levelling compound can also be processed (see accessories)

Kleinsilo_in_zwei_Ausfuehrungen_en

 

Small silo inoCOMB Cabrio
Operating voltageV/Hz/A400 / 50 / 32
Drive performancekW*
Capacitykgmax. 200
Empty weightkg420
Delivery rate (mineral materials)l/minmax. 30
Conveying distance (mineral materials)mmax. 60
Pressure height (mineral materials)mmax. 30
Water connectionbar4 (¾")
Machine techniqueSilo and machine technology
Comments* Motorleistung Continuous mixer: 4,0 kW / Delivery pump 6,3 kW
Dimensions (L x W x H)mm1200 x 800 x 1300
Small
Small silo inoCOMB Cabrio "D" for spray applications with ready-mixed mortar
Bonding or reinforcing mortar
Can be used for all pumpable, powdery screed and levelling compounds
Facade plasters
Floor leveling compound
Grouting of channels and machine foundations
Organic spattling compounds
Reprofiling mortar
Spraying final coats

Scope of delivery
inoCOMB Cabrio “D”


Item no. 10000064-004 (NEW)
Item no. 10042684 (refurbished)

Small silo consisting of:

  • Frame
  • Material hopper
  • Switching cabinet
  • Vibrating unit


Mixing unit consisting of:

  • Gear motor 280 rpm
  • Metering shaft gradient 30 mm
  • Mixing shaft
  • Water fitting
  • PU mixing pipe inoEASY Mix

Pump unit consisting of:

  • Detachable delivery pump
  • Pump housing made from stainless steel
  • Gear motor, frequency-controlled
  • Pump shaft D-coating Rotex
  • Pressure and suction flange, D-coating
  • Mortar pressure gauge
  • Rotor/stator D7-2.5 S
  • Coupling M-piece 50
Small silo inoCOMB Cabrio
Vibrating unit for one-way-container

Vibrating unit for one-way-container

The vibrating unit is belted directly onto the one-way container

  • For non-flowing powder material in a one-way container
  • Prevents tunnel formation in the material hopper

Scope of delivery:
Vibrating unit with support bracket, tension belt and power cable

Vibrating unit for one-way container (Article No. 10039026)
Double adapter for vibrating unit

Double adapter for vibrating unit

  • Double adapter 230 V CEE for a vibrating unit on a one-way container

If both one-way containers that supply the Cabrio with material via the inoFLEX Duo are equipped with a vibrating unit, two double adapters are required (one adapter for each rotor sensor / one adapter for each vibrating unit)

Double adapter for vibrating unit (Article No. 10038995)
Attachment hood for inoCOMB Cabrio 0.2

Attachment hood for inoCOMB Cabrio 0.2

For filling with big bag

  • with raised lip for filler hole
  • without cover for filler hole, including vent pipe

Big-bag: Attachment hood for inoCOMB Cabrio for filling with big bag (Article No. 10041543)
Metering shaft - gradient 45 mm

Metering shaft - gradient 45 mm

Metering shaft - gradient 45 mm (Article No. 10042444)
Multi-purpose hose

Multi-purpose hose

  • For universal use, e.g. air, water
  • GEKA couplings crimped with sleeves on both sides
Technical data:  
Max. operating pressure: max. 15 bar
Temperature range:  -20 up to +90°C

Water / air hose - Ø 3/4“ - Length 20 m (Article No. 10022011)
INOTEC mortar hose

INOTEC mortar hose

  • Abrasion-resistant special hose for pumping highly pressurised wet mortar; largely kink-proof
  • For an operating pressure of 40 bar with 3 times the reliability
  • Yellow on the outside: less heat builds up in the event of sun exposure
  • With mortar hose couplings, M-piece and rotating V-piece (only with diameters of 25 mm)
  • With cam levers on the M-piece
Technical data:  
Operating pressure:  40 bar
Bursting pressure: 120 bar

Inotec mortar hose - Ø 35 mm - Length 10 m (Article No. 10022032)
Inotec mortar hose - Ø 35 mm - Length 20 m (Article No. 10008346-007)
Inotec mortar hose - Ø 40 mm - Length 13,3 m (Article No. 10041544)
Inotec mortar hose - Ø 40 mm - Length 20 m (Article No. 10041545)
Inotec mortar hose - Ø 50 mm - Length 13,3 m (Article No. 10008346-010)
Inotec mortar hose - Ø 50 mm - Length 20 m (Article No. 10008346-011)
inoFLEX Duo - Two

inoFLEX Duo - Two "inoFLEX" dry conveyor units are integrated in a cover hood for the small silo inoCOMB Cabrio

  • The two flexible delivery shafts transport the material to be processed from the one-way container directly to the small inoCOMB Cabrio silo vessel

Scope of delivery:
Cover hood, two flexible delivery shafts, two motors, two rotor sensors

inoFLEX Duo (Article No. 10042432)
Delivery shaft for the inoFLEX Duo

Delivery shaft for the inoFLEX Duo

Delivery shaft for the inoFLEX Duo (L=3,200 mm) (Article No. 10042547)
400 V / 5 x 4 mm² extension cable

400 V / 5 x 4 mm² extension cable

  • 32 A plug and coupling

400 V / 5 x 4 mm² extension cable - Length 20 m (Article No. 10015201)
230 V / 3 x 2.5 mm² extension cable

230 V / 3 x 2.5 mm² extension cable

  • 16 A Schuko plug and coupling

230 V extension cable, 3 x 2.5 mm², length 10 m (Article No. 10015208)
Reprofiling sprayer

Reprofiling sprayer

  • Reprofiling sprayer 35 V with nozzle pipe 12 mm, connection 35 V-piece

(Article No. 10023309)
Nozzle pipe 12 mm (Article No. 10022789)
Nozzle pipe 15 mm (Article No. 10022790)
Coupling reducer

Coupling reducer

  • For connecting two mortar hoses or reducing the machine outlet.

Coupling reducer: 42 M-piece -> 35 M-piece (Article No. 10022097)
Coupling reducer: 50 V-piece -> 35 M-piece (Article No. 10022100)
Coupling reducer: 50 V-piece -> 42 V-piece (Article No. 10041187)
Plaster piece for cleaning mortar hoses

Plaster piece for cleaning mortar hoses

Plaster piece 42-V-part (Article No. 10042213)
Plaster piece 50-M-part (Article No. 10022116)
Plaster piece with GEKA coupling - 35 M-piece (Article No. 10022114)
Sponge balls (soft version)

Sponge balls (soft version)

  • For cleaning material / mortar hoses

Sponge balls (soft version) - Ø 45 mm for hose Ø 35 mm (Article No. 10008116-005)
Sponge balls (soft version) - Ø 60 mm for hose Ø 40 / 50 mm (Article No. 10008116-006)
Booster pump CTM61 for increasing the water supply

Booster pump CTM61 for increasing the water supply

(Observe local regulations)

  • 230 V / 50 Hz / 0.33 kW
  • incl. connecting cable

Booster pump CTM61 for increasing the water supply (Article No. 10041155)
Check valve set for pressure boost pump (CTM61)

Check valve set for pressure boost pump (CTM61)

  • With 2 m hose

Check valve set for pressure boost pump (CTM61) (Article No. 10006508)
inoEASYMIX PU mixing pipe

inoEASYMIX PU mixing pipe

  • Including mixing shaft, mixing pipe cover and holders

inoEASYMIX PU mixing pipe for reprofiling mortar (Article No. 10042142)
Mixing shaft for inoEASYMIX

Mixing shaft for inoEASYMIX

Mixing shaft for inoEASYMIX (Article No. 10040026)
Conversion kit from Cabrio “D” to Cabrio “R” version

Conversion kit from Cabrio “D” to Cabrio “R” version

With this conversion kit the Cabrio can also be used to process floor levelling
compound.

Conversion kit “R” comprising:

  • Metering shaft - gradient 45 mm
  • Drive unit 373 rpm
  • Pump shaft Ü 50
  • Suction flange Ü 50
  • Rotor / stator 1R6
  • Straight pressure flange Ü 50
  • Coupling M-piece 50
  • Mortar pressure gauge

Conversion kit from Cabrio “D” to Cabrio “R” version (Article No. 10030012)
Rotor D7-2.5 “S”

Rotor D7-2.5 “S”

Rotor D7-2,5 „S“ (Article No. 10022556)
Stator D 7-2,5 S

Stator D 7-2,5 S

Stator D 7-2,5 S (Article No. 10022515)
Assembly spray lubricant

Assembly spray lubricant

  • For assembling the conveying screw and screw casing
  • 400 ml

Assembly spray lubricant (Article No. 10004591)

Inquiry: Kleinsilo inoCOMB Cabrio "D" für Spritzapplikationen mit Fertigmörtel



* Required