- Powdery materials: OWC in combination with a continuous mixer
- Powdery materials: OWC in combination with a continuous mixer and a delivery pump
- Powdery materials: OWC in combination with the dry delivery unit for mixing pumps
- Powdery materials: OWC in combination with two dry delivery unit for a small silo
- Paste-like materials: OWC in combination with a wet delivery unit and a delivery pump
- Wall & ceiling basic set
- Wall & ceiling XL set
- Floor & parquet basic set
- Floor & parquet XL set
Floor & parquet basic set
VOGT Hammer Floor & parquet basic setVOGT hammers
Floor & parquet basic set
Tried and tested VOGT hammers for removing floor coverings and parquet
Benefits at a glance
- Versatile in use
- High impact force
- Proven and solid construction
- Ergonomic work posture
- Vibration-dampened version available
Flooring is effectively removed with the VH 50-130.18 / VH 60-130.18. The weight and impact force are advantageous for tough materials.
Using the recommended device length ensures good posture and ergonomic work.
Areas of application
Floor coverings, floor tiles, parquet, and much more.
Further information / downloads:
Alternative Machines:
| Dimensions (L): | 1.300 mm |
| Weight: | 5,8 kg / 6,7 kg |
 | |
Basic set Tools
Occupational health and safety
Accessories
| Basic set Tools
Occupational health and safety
Accessories
|
Delta-P knife
- angled with undercut
Areas of application:
Lime and gypsum plaster, parquet, laminate, bitumen, strong tiles, natural stone slabs, magnesite-bonded, lightweight wooden boards, gypsum boards, slats
Delta-P knife (Chisel housing 18 mm) Length / Width: 300/100 mm (Article no. 10042598)
Delta-P knife (Chisel housing 18 mm) Length / Width: 300/80 mm (Article no. 10042596)
Flat chisel
Areas of application:
Concrete, rock, masonry, composite screed, thick-set tiles, cement plaster
Flat chisel (Chisel housing18 mm) Length / Width: 260/25 mm (Article no. 100NEU3)
Wide chisel
Areas of application:
Stubborn plaster, masonry, thick-set tiles, floating screed
Wide chisel (Chisel housing 18 mm) Length / Width: 260/40 mm (Article no. 10042600)
Scraper holder for scrapers
- angled, with mounting kit
Scraper holder (Chisel housing 18 mm) Length / Width: 300/100 mm (Article no. 10042586)
Scraper Version 1 (see Areas of application)
- sharpened
Areas of application:
Plaster on a level surface, coatings, thin plaster, spray asbestos, glued tiles, glue residues, concrete residues and overhangs, road markings
Scraper Version 1 (see Areas of application) Length / Width: 120/100 mm (Article no. 10020057)
Scraper Version 1 (see Areas of application) Length / Width: 120/120 mm (Article no. 10020058)
Scraper Version 2 (see Areas of application)
- sharpened
Areas of application:
Bitumen, glue, paint and filler residue; PVC, CV, linoleum and rubber coverings; cork; needle felt; carpet; ball yarn
Scraper Version 2 (see Areas of application) Length / Width: 120/160 mm (Article no. 10020059)
Scraper Version 2 (see Areas of application) Length / Width: 120/200 mm (Article no. 10020060)
Franken blade
- sanded on both sides
Areas of application:
Cutting of elastic PU adhesive under parquet and laminate, under façade claddings and ship top decks
Franken blade Length / Width: 150/120 mm (Article no. 10019924)
Parquet wedge (red) for Franken blade
- with mounting kit, reduces the frictional resistance of the PU adhesive
Parquet wedge for Franken blade (90 mm) (Article no. 10042587)
Cross blade holder with cross blade
- for the cutting of soft flooring in any width
Can be used in combination with a scraper and scraper holder.
Cross blade holder with cross blade (Article no. 10019945)
Sales contact
Inotec GmbH
Daimlerstraße 9-11
79761 Waldshut-Tiengen
Phone: +49 7741 6805 0
Fax: +49 7741 6805 665
Request form Floor & parquet basic set
Call us, we will advise you!
Customer Service
+49 7741 6805 525
OPENING TIMES
Monday - Friday
7:30 am - 17:00 pm
