Tried and tested Vogt hammers for the removal of wall and ceiling coatings
Benefits at a glance
- Versatile in use
- Also suitable for overhead work
- Proven and solid construction
- Extra lightweight design for virtually fatigue-free work
- Vibration-dampened version available
When it comes to wall and overhead work, lightweight tools play an essential role. If the device is too heavy, work performance will be reduced over time.
Wall and ceiling coatings are best removed with the lightweight devices VH 25-90.14 / VH 30-90.14.
The entire floor height can be reached when the recommended device is used.
| Machine technique | VOGT hammers | |
| Length | mm | 900 |
| Weight | kg | approx. 3,5 kg / 4,3 |
Basic set
Vogt hammer
VH 25-90.14
Item no. 10042576
Tools
- Delta-P knife M 410 UP
- Wide chisel M 340
- Scraper holder M 5000
- Scraper B 120 S
Occupational health and safety
- Work gloves, safety goggles, earplugs
Accessories
- Adapter 3/4 inch to standard connection Z 200 S
- Precision lubricator Z 300 S
- Pneumatic hose 10 m
- VOGT special oil 0.1 l
- Ring spanner 15/19
- Metal transport case
- Operating instructions
Basic set
Vogt hammer (vibration-dampened)
VH 30-90.14
Item no. 10042577
Tools
- Delta-P knife M 410 UP
- Wide chisel M 340
- Scraper holder M 5000
- Scraper B 120 S
Occupational health and safety
- Work gloves, safety goggles, earplugs
Accessories
- Adapter 3/4 inch to standard connection Z 200 S
- Precision lubricator Z 300 S
- Pneumatic hose 10 m
- VOGT special oil 0.1 l
- Ring spanner 15/19
- Metal transport case
- Operating instructions
Delta-P knife
- angled with undercut
Areas of application:
Lime and gypsum plaster, parquet, laminate, bitumen, strong tiles, natural stone slabs, magnesite-bonded, lightweight wooden boards, gypsum boards, slats
Flat chisel
Areas of application:
Concrete, rock, masonry, composite screed, thick-set tiles, cement plaster
Wide chisel
Areas of application:
Stubborn plaster, masonry, thick-set tiles, floating screed
Scraper holder for scrapers
- angled, with mounting kit
Scraper Version 1 (see Areas of application)
- sharpened
Areas of application:
Plaster on a level surface, coatings, thin plaster, spray asbestos, glued tiles, glue residues, concrete residues and overhangs, road markings
Scraper Version 2 (see Areas of application)
- sharpened
Areas of application:
Bitumen, glue, paint and filler residue; PVC, CV, linoleum and rubber coverings; cork; needle felt; carpet; ball yarn
Cross blade holder with cross blade
- for the cutting of soft flooring in any width
Can be used in combination with a scraper and scraper holder.