Robust, handy and versatile cutting device for ETICS insulation boards

Benefits at a glance

  • Multi-ply, environmentally-friendly painted Multiplex plywood with scaling
  • Continuous operation with ON/OFF switch
  • Swivel cutting bracket up to 45°
  • Swivel board support for mitre cuts up to 45°
  • 1 depth limiter for separating cuts
  • Belt with snap lock for assembly on the handrail
  • Freestanding support included in delivery

The robust inoCUT ic128 with hot wire cutter and push-button operation is versatile and is thus the ideal cutting device for the construction site.
The inoCUT ic128 revolutionises the thermal cutting of ETICS rigid foam panels on the construction site.
Rafter beam and corner cutouts for window sills are easily achievable with the optional corner cutter.

 

inoCUT ic128
Operating voltageV/Hz/A110-230 / 50 / 16
Cutting lengthcmmax. 128
Cutting depthcmmax. 90° = 30 cm / 45° = 20
Machine techniqueCutters
Dimensions (W x H x D)mm415 x 1850 x 150
Weightkgapprox. 14,8
inoCUT
inoCUT ic128
Corkboard
Foam glass panels
Hemp boards
Mineral wool
Phenolic resin panels
Polystyrene rigid foam panels
Polyurethane panels
Potential cuts: Cut-outs
Potential cuts: Diagonal cuts
Potential cuts: Diagonal cuts with mitre joints
Potential cuts: Groove cuts
Potential cuts: Layered cut
Potential cuts: Layered cuts with mitre joints
Potential cuts: Layered groove cuts
Potential cuts: Mitre cuts
Potential cuts: Separating cuts
Potential cuts: Straight cuts
Rolls of clamping felt

Basic module
Art.-Nr. 10042904
Scope of delivery
inoCUT ic128:

  • Base plate
  • Swivel cutting bracket
  • Left and right support strip
  • Power supply unit
  • Connecting cable
  • Freestanding support
  • Swivel base
  • Railing fastening
  • Operating instructions
Transport case made of aluminum

Transport case made of aluminum

  • for inoCUT ic127 and ic128 Battery

Aluminium transport case (Article No. 10044543)
Corner cutter for inoCUT ic128 / inoCUT ic128 Battery

Corner cutter for inoCUT ic128 / inoCUT ic128 Battery

  • Rafter cutouts, corner cutouts in window sills, plasterboard, lintels, etc.
  • 0 - 90° swivel
  • Degree scale and slider for diagonal cut repetitions
  • Tool-free, fast wire change thanks to integrated reserve wire spool
  • Separate transformer (not with the battery version)
  • With nylon pouch

Corner cutter for inoCUT ic128 (Article No. 10042900)
Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm - 20 m

Spare wire with a diameter of 0.65 mm (Article No. 10026102)

Inquiry: inoCUT ic128



* Required