The perfect silo continuous mixer for processing powdery materials
Benefits at a glance
- Constant material consistency
- High mixing rate (22 l/min.)
- PU mixing pipe with quick-release fasteners
- Detachable mixing pipe cover
- Standardised flange attachment with a diameter of 250 mm and thus suitable for all conventional silos
- Automatic rotation direction detection
- Very simple operation and cleaning
- Low-maintenance and construction site compliant technology
The inoMIX F51 is the perfect 400 V continuous mixer for use with silos for mixing powdery materials.
Its compact design means that the inoMIX F51 can also remain flange-mounted to the silo during transport.
The mixing and metering shafts are driven directly using a gear motor.
This video shows the assembly and operation of the inoMIX F51 continuous flow mixer.
It does not replace reading the original operating instructions.

Video
Service details
Services
Operating voltage | V/Hz/A | 400 / 50 / 25 |
Drive performance | kW | 2,6 |
Mixing performance | l/min | max. 60 l/min` - ca. 100 l/min`` |
Machine technique | Mixers | |
Comments | * With optional metering shaft, gradient 40 mm | |
Dimensions (L x W x H) | mm | 1900 x 630 x 440 |
Weight | kg | approx. 135 |
![]() inoMIX F100 | |
Cement pastes, suspensions | |
Cement plasters | |
Dried clay plasters | |
ETICS glue, mineral | |
Fire protection mortar | |
Floating screeds | |
Floor spattling compounds | |
Grout | |
Grouting mortar | |
Gypsum filling compounds | |
Light masonry mortar | |
Lime cement plasters | |
Lime plasters | |
Lime smoothers | |
Loam plasters | |
Masonry mortar | |
Mineral textured plasters | |
Multi-layer acoustic spray plasters | |
PCC- and SPCC-mortar / filler | |
Rear masonry mortar | |
Renovating plaster systems | |
SPCC Spatula | |
Trass drainage mortar |
Scope of delivery
inoMIX F21:
Item no. 10043789
- Solid steel funnel
- inoPOWERMIX “S” mixing pipe, complete
- Mixing shaft
- Metering shaft
- Gear motor
- Water fitting
- Operating instructions

Electric vibration motor (three-phase unbalance motor) as external vibrator for attachment to silos to prevent material flow or compression problems.
- Mains voltage: 400 volts / 50 Hz, 5 m connecting cable
Electric vibration motor (three-phase unbalance motor) as external vibrator for attachment to silos (Article No. 10039440)
Multi-purpose hose
- For universal use, e.g. air, water
- GEKA couplings crimped with sleeves on both sides
Technical data: | |
Max. operating pressure: | max. 15 bar |
Temperature range: | -20 up to +90°C |
Water / air hose - Ø 3/4“ - Length 20 m (Article No. 10022011)
400 V extension cable, 5 x 2.5 mm², length 20 m
- 16 A, CEE plug and coupling
400 V extension cable, 5 x 2.5 mm², length 20 m (Article No. 10015199)