The powerful 230 V* continuous mixer for powdery materials
Benefits at a glance
- Considerable time saving compared with mixing material using handheld agitators
- Simple operation
- Constant material consistency
- High mixing rate
- The machine can be quickly dismantled into individual components without the need for tools, which makes for short setup times
- Low-maintenance technology
- PU mixing pipe (detachable)
- Simple cleaning
- Compatible with delivery pumps
The inoMIX S50 is a powerful 230 V continuous mixer that is in a class of its own. All powdery materials can be processed quickly and easily by the strong motor.
It is handy, powerful and can be assembled and dismantled again in just a few steps.
_______________
* The machine is also available in 110 V

Video
Service details
Operating voltage | V/Hz/A | 400 / 50 / 16 |
Drive performance | kW | 2,6 |
Mixing performance | l/min | max. ca. 22 l/min - ca. 50 l/min* |
Material container | l | max. 75 |
Machine technique | Mixers | |
Comments | * with optional metering shaft (gradient 30 mm) | |
Dimensions (L x W x H) | mm | 1200 x 715 x 990 |
Weight | kg | approx. 90 |
![]() inoMIX S50 S | |
Cement pastes, suspensions | |
Cement plasters | |
Dried clay plasters | |
ETICS glue, mineral | |
Fire protection mortar | |
Floating screeds | |
Floor spattling compounds | |
Grout | |
Grouting mortar | |
Gypsum filling compounds | |
Light masonry mortar | |
Lime cement plasters | |
Lime plasters | |
Lime smoothers | |
Loam plasters | |
Masonry mortar | |
Mineral textured plasters | |
Multi-layer acoustic spray plasters | |
PCC- and SPCC-mortar / filler | |
Rear masonry mortar | |
Renovating plaster systems | |
SPCC Spatula | |
Trass drainage mortar |
Scope of delivery
inoMIX S50
Item no. 10043103
- Frame
- 2 running wheels
- Material hopper
- Gear motor
- inoPOWERMIX “S” mixing pipe, complete
- Mixing shaft
- Metering shaft
- Water fitting
- Operating instructions

Multi-purpose hose
- For universal use, e.g. air, water
- GEKA couplings crimped with sleeves on both sides
Technical data: | |
Max. operating pressure: | max. 15 bar |
Temperature range: | -20 up to +90°C |
230 V / 3 x 2.5 mm² extension cable
- 16 A Schuko plug and coupling
400 V extension cable, 5 x 2.5 mm², length 20 m
- 16 A, CEE plug and coupling
Plastic funnel attachment for inoMIX S50 / S50 T / S50 S
- to increase the filling volume for light levelling material (approx. 160 l)
inoPOWERMIX “S” mixing pipe, complete
- including PU inlay, steel frame with eccentric fastenings, mixing pipe cover and mixing shaft (stainless steel) (e.g. floor levelling compounds, masonry mortar, etc.)
Mixing shaft for inoPOWERMIX “S” (stainless steel)
(e.g. floor levelling compounds, masonry mortar, drainage mortar, industrial screeds, etc.)
inoPOWERMIX+ “S” PU mixing pipe, complete, with wide material discharge for stiff material with high delivery rate
including PU inlay, steel frame with eccentric fastenings, mixing pipe cover and mixing shaft (stainless steel) (e.g. drainage mortar, industrial screeds, etc.)
inoPOWERMIX “L” mixing pipe
including PU inlay, steel frame with eccentric fastenings, mixing pipe cover and mixing shaft (stainless steel)